Advan T2A USB Drivers

Advan T2A phone not showing up on the PC? Or Advan T2A phone won’t connect to a computer? It might be because of the missing Advan T2A USB drivers or corrupted drivers. To fix the problem, download the Advan T2A USB driver and install it on your computer.

Advan USB drivers are required to connect Advan T2A to a Computer or Laptop via USB cable. If you’re looking for a Advan T2A USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then we have got you covered. We have shared the official USB Driver for Advan T2A along with the ADB interface drivers and Fastboot drivers on this page.

With Advan T2A Android USB Driver installed, we can connect the device to the computer as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files between the two devices.

Advan T2A ADB Driver and Fastboot Driver enable you to pass ADB commands and Fastboot commands from the computer to perform certain operations on your phone.

Download Advan T2A USB Driver

The Advan mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.

Advan T2A Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Advan T2A USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Advan T2A Fastboot and ADB drivers can be downloaded below.

Advan T2A ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Advan T1X Plus P7058T USB Drivers

How to Install Advan T2A RDA USB Drivers

1. Download the RDA Driver package and extract it on your computer.
2. Once the RDA Driver package is extracted, open the x64 folder for the 64-bit system and the x86 folder for the 32-bit system. You can check the System Type by pressing Windows + Pause keys.
3. Now, right-click on the DPInst.exe setup file and select Run as administrator.
4. Now, the Device Driver Installation Wizard window should open.
5. Click on Next to install the RDA USB Driver on your computer.
6. If the device driver installation is unsuccessful, disable the driver signature enforcement on your computer. Here's the video on how to disable the driver signature enforcement on a Windows computer.
7. After disabling driver signature enforcement, rerun the RDA driver installer. If a Windows security window pops up, click on the "Install this driver software anyway".
8. Now, the RDA USB drivers should be installed on your computer.
9. When the installation process is completed, click on the Finish button to close the wizard window.
10. Now, reboot your computer.

How to Install Advan T2A USB Drivers Manually

1. Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
2. Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Once the Device Manager window loads, click on your Computer name.
4. Now click on Action and then select Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now select Show All Devices and click on Next.
8. Now click on Have Disk… to launch the Install From Disk window.
9. Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf driver file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install Advan T2A Android USB Drivers

How to Install Advan T2A ADB and Fastboot Drivers

1. Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
2. Now, right-click on the ADB driver installer setup file and select Run as administrator.
3. Now a command prompt window should load on your computer.
4. It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
5. Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
6. Now, the ADB and Fastboot driver installation process should start.
7. When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
8. Now the "Device Driver Installation Wizard" window should pop-up.
9. Click on Next to install the Google USB Drivers (WinUSB).
10. Once the installation process is completed, click on Finish and reboot your computer.

Video Tutorial: How to Install Advan T2A ADB and Fastboot Drivers