Archos 70 Cobalt USB Drivers

Facing trouble connecting Archos 70 Cobalt to a computer using a USB cable? Computer not recognizing USB when Archos 70 Cobalt is connected to PC? It might be because of the missing Archos 70 Cobalt USB drivers or bad or corrupted drivers. To fix the Archos 70 Cobalt not showing up on the computer, download Archos 70 Cobalt USB Drivers and install them on your Windows computer.

Most computers don’t have proper Google Android USB Drivers installed, so it is required to download Archos USB Drivers and install them on your computer. Once the Archos drivers are installed, we can adequately connect Archos 70 Cobalt to the Computer or Laptop using a USB data cable. You can download official USB Drivers for Archos 70 Cobalt along with ADB interface drivers and fastboot drivers on this page.

With Archos 70 Cobalt Android USB Drivers installed, we can establish a secure connection between a computer and a smartphone. It helps transfer files and data like images, videos, and documents between the computer and the mobile phone through MTP (Media Transfer Protocol).

With the Archos 70 Cobalt ADB driver and Fastboot driver, we can pass ADB commands and Fastboot commands to the phone from the computer via Command Prompt (CMD) and perform certain operations.

Download Archos 70 Cobalt USB Driver

The Archos Mobile Phone drivers provided here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlocking Bootloader, etc. They can also be used for common purposes like transferring media, files, and documents to and from phone to computer.

Archos 70 Cobalt Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Archos 70 Cobalt USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Archos 70 Cobalt Fastboot and ADB drivers can be downloaded below.

Archos 70 Cobalt ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Archos 101 Xenon USB Drivers

How to Install Archos 70 Cobalt Rockchip USB Drivers

1. Download and extract the Rockchip USB Driver package to Desktop on your computer.
2. Run Rockchip Driver Assistant (DriverInstall.exe) as administrator on your computer from the extracted folder.
3. Now, the RK Driver Assistant window should open.
4. Click on the Install Driver button to proceed with the installation process.
5. If Windows Security window asking, "Would you like to install this device software?" pop-up. Click on Install to continue.
6. When the RK Drivers are installed, you'll see the "Install driver ok" message.
7. Click on OK to exit the setup window and reboot your computer.

How to Install Archos 70 Cobalt USB Drivers Manually

1. Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
2. Open the Device Manager on your computer by searching device manager from Windows Start Menu.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then select Add legacy hardware.
5. Add Hardware Wizard window should open, click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. On the next screen, click on Have Disk… to open the Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install Archos 70 Cobalt Android USB Drivers

How to Install Archos 70 Cobalt ADB and Fastboot Drivers

1. Download and extract 15 seconds ADB installer on your computer.
2. Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
3. Now a command prompt window with a blue background and white text should open.
4. It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
6. Now, the ADB driver and Fastboot driver installation process should begin.
7. When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
8. Now the "Device Driver Installation Wizard" window should open.
9. Click on Next to continue installing the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and reboot your computer.

Video Tutorial: How to Install Archos 70 Cobalt ADB and Fastboot Drivers