Azpen A748 USB Drivers (DOWNLOAD)

Does your Azpen A748 phone not connecting to a PC? or a Computer is not recognizing Azpen A748 when connected using a USB cable? It can be because of the missing Azpen A748 USB Driver or corrupted Android USB Driver. To fix the problem, download Azpen A748 USB Drivers and install them on your Windows computer.

Azpen USB Drivers are necessary to connect Azpen A748 to a Computer or Laptop via USB data cable. On this page, you can download official Azpen A748 USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Along with the official USB Driver for Azpen A748, we have also shared Azpen A748 ADB interface drivers and Fastboot drivers.

Azpen A748 Android USB Drivers helps in establishing a secure connection between your computer and mobile phone. It helps to transfer data like images, videos, documents, and other files to and from your mobile to computer through MTP (Media Transfer Protocol).

The Azpen A748 ADB driver and Fastboot driver allow you to pass ADB commands and Fastboot commands from your computer to your phone and perform certain operations.

Download Azpen A748 USB Driver

The Azpen Mobile drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. They can also be used for general purposes like transferring media, documents, and other files to and from phone to computer.

Azpen A748 Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Azpen A748 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Azpen A748 Fastboot and ADB drivers can be downloaded below.

Azpen A748 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Azpen A842 USB Drivers

How to Install Azpen A748 USB Drivers Manually

Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
When the Device Manager window opens, click on your Computer name.
Now click on Action and then click on Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.

Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now click on Show All Devices from the list and click on Next.
Now click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.

Now select the Android ADB Interface driver from the list and click on Next.
In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install Azpen A748 Android USB Drivers

Subscribe to Android USB Drivers

How to Install Azpen A748 ADB and Fastboot Drivers

Download and extract the 15 seconds ADB installer zip package on your computer.

Now right click on the adb installer setup exe file and click on Run as administrator.
Now a command prompt window should open.
It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
Now, the ADB driver and Fastboot driver installation process should begin.

When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
Now the "Device Driver Installation Wizard" window should open.
Click on Next to install the Google USB Drivers (WinUSB).
Once installed, click on Finish and restart your computer.