Having trouble connecting Beelink GT1 Mini to PC? It might be a driver problem, so download Beelink GT1 Mini Android USB Drivers and install them on Windows 11, Windows 10, Windows 7, 8, 8.1, or XP PC. The Beelink GT1 Mini USB Drivers provided here are official and are virus-free. Based on your need, download USB Driver for Beelink GT1 Mini from the downloads section and install it on Windows PC by following the instructions provided below.
With Beelink GT1 Mini USB Driver installed on the PC, we can establish a secure connection between Computer and Mobile. It helps transfer data like images, video, documents, and other files from Mobile to PC.
We have also provided Beelink GT1 Mini ADB and Fastboot drivers, which help pass ADB commands and Fastboot commands to the Phone via Command Prompt (CMD) from the computer.
Download Beelink GT1 Mini USB Driver
The Beelink mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.
Beelink GT1 Mini Driver for Flashing Firmware
How to install: Follow Tutorial
Beelink GT1 Mini USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Beelink GT1 Mini Fastboot and ADB drivers can be downloaded below.
Beelink GT1 Mini ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Beelink GT King USB Drivers
How to Install Beelink GT1 Mini Amlogic USB Drivers
- Download the Amlogic USB Driver package and extract it to Desktop on your computer.
- When extracted, open the folder and run Amlogic Driver installer (InstallDriver.exe) as administrator.
- Click Next when the Device Driver Installation Wizard window opens.
- Now, the Amlogic Driver will be installed. Once installed, click on Finish to close the setup window.
- Finally, reboot your computer.
How to Install Beelink GT1 Mini USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
- Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
- When the Device Manager window opens, click on your Computer name.
- Now click on Action and then click on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now click on Show All Devices from the list and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Now select the Android ADB Interface driver from the list and click on Next.
- In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install Beelink GT1 Mini Android USB Drivers
How to Install Beelink GT1 Mini ADB and Fastboot Drivers
- Download and extract the 15 seconds ADB installer zip package on your computer.
- Now right click on the adb installer setup exe file and click on Run as administrator.
- Now a command prompt window should open.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
- Now, the ADB driver and Fastboot driver installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the "Device Driver Installation Wizard" window should open.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.
Video Tutorial: How to Install Beelink GT1 Mini ADB and Fastboot Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY