Bliss Pad R9711 USB Drivers

Does your Bliss Pad R9711 phone not connecting to a PC? or a Computer is not recognizing Bliss Pad R9711 when connected using a USB cable? It can be because of the missing Bliss Pad R9711 USB Driver or corrupted Android USB Driver. To fix the problem, download Bliss Pad R9711 USB Drivers and install them on your Windows computer.

Bliss USB Drivers are necessary to connect Bliss Pad R9711 to a Computer or Laptop via USB data cable. On this page, you can download official Bliss Pad R9711 USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Along with the official USB Driver for Bliss Pad R9711, we have also shared Bliss Pad R9711 ADB interface drivers and Fastboot drivers.

Bliss Pad R9711 Android USB Drivers helps in establishing a secure connection between your computer and mobile phone. It helps to transfer data like images, videos, documents, and other files to and from your mobile to computer through MTP (Media Transfer Protocol).

The Bliss Pad R9711 ADB driver and Fastboot driver allow you to pass ADB commands and Fastboot commands from your computer to your phone and perform certain operations.

Download Bliss Pad R9711 USB Driver

The Bliss Mobile drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. They can also be used for general purposes like transferring media, documents, and other files to and from phone to computer.

Bliss Pad R9711 Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Bliss Pad R9711 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Bliss Pad R9711 Fastboot and ADB drivers can be downloaded below.

Bliss Pad R9711 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Bliss Pad M8040 USB Drivers

How to Install Bliss Pad R9711 Rockchip USB Drivers

1. Download and extract the Rockchip USB Driver package to Desktop on your computer.
2. Run Rockchip Driver Assistant (DriverInstall.exe) as administrator on your computer from the extracted folder.
3. Now, the RK Driver Assistant window should open.
4. Click on the Install Driver button to proceed with the installation process.
5. If Windows Security window asking, "Would you like to install this device software?" pop-up. Click on Install to continue.
6. When the RK Drivers are installed, you'll see the "Install driver ok" message.
7. Click on OK to exit the setup window and reboot your computer.

How to Install Bliss Pad R9711 USB Drivers Manually

1. Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
2. Open the Device Manager on your computer by searching device manager from Windows Start Menu.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then select Add legacy hardware.
5. Add Hardware Wizard window should open, click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. On the next screen, click on Have Disk… to open the Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install Bliss Pad R9711 Android USB Drivers

How to Install Bliss Pad R9711 ADB and Fastboot Drivers

1. Download and extract 15 seconds ADB installer on your computer.
2. Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
3. Now a command prompt window with a blue background and white text should open.
4. It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
6. Now, the ADB driver and Fastboot driver installation process should begin.
7. When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
8. Now the "Device Driver Installation Wizard" window should open.
9. Click on Next to continue installing the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and reboot your computer.

Video Tutorial: How to Install Bliss Pad R9711 ADB and Fastboot Drivers