Casper VIA CTA-E07-13A phone not showing up on the PC? Or Casper VIA CTA-E07-13A phone won’t connect to a computer? It might be because of the missing Casper VIA CTA-E07-13A USB drivers or corrupted drivers. To fix the problem, download the Casper VIA CTA-E07-13A USB driver and install it on your computer.
Casper USB drivers are required to connect Casper VIA CTA-E07-13A to a Computer or Laptop via USB cable. If you’re looking for a Casper VIA CTA-E07-13A USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then we have got you covered. We have shared the official USB Driver for Casper VIA CTA-E07-13A along with the ADB interface drivers and Fastboot drivers on this page.
With Casper VIA CTA-E07-13A Android USB Driver installed, we can connect the device to the computer as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files between the two devices.
Casper VIA CTA-E07-13A ADB Driver and Fastboot Driver enable you to pass ADB commands and Fastboot commands from the computer to perform certain operations on your phone.
Download Casper VIA CTA-E07-13A USB Driver
The Casper mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.
Casper VIA CTA-E07-13A Driver for Flashing Firmware
How to install: Follow Tutorial
Casper VIA CTA-E07-13A USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Casper VIA CTA-E07-13A Fastboot and ADB drivers can be downloaded below.
Casper VIA CTA-E07-13A ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Casper VIA V9 USB Drivers
How to Install Casper VIA CTA-E07-13A Amlogic USB Drivers
- Download and extract the Amlogic Android USB Driver package on your computer.
- After extracting the driver package, open the folder and right-click on the Amlogic USB Driver installer (InstallDriver.exe), and select Run as administrator.
- Now, the Device Driver Installation Wizard window should load. Click on Next to begin the Amlogic Driver installation process.
- When the Amlogic USB Drivers are installed, click on the Finish button to close the setup wizard window.
- Finally, restart your computer.
How to Install Casper VIA CTA-E07-13A USB Drivers Manually
- Download and extract the latest Android USB Driver (latest_usb_driver_windows.zip) file to Desktop on your computer.
- Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Now click on your Computer name in the Device Manager window.
- Now click on Action and then click on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Select Show All Devices from the list and click on Next.
- In the next screen, click on Have Disk… to open the Install From Disk window.
- In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Now select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install Casper VIA CTA-E07-13A Android USB Drivers
How to Install Casper VIA CTA-E07-13A ADB and Fastboot Drivers
- Download and extract the 15 Seconds ADB installer zip file on your computer. Once extracted, you'll find the ADB driver installer setup file.
- Right-click on the ADB installer setup file and select Run as administrator.
- Now 15 seconds ADB driver installer command prompt window should open on your computer.
- It should ask whether you want to install the ADB driver and Fastboot driver. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should begin.
- When the ADB driver installation is finished, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to begin installing Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and restart your computer.
Video Tutorial: How to Install Casper VIA CTA-E07-13A ADB and Fastboot Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY