CMX Aquila 080-1008 phone having difficulty connecting to a computer? Windows computer not recognizing CMX Aquila 080-1008 Android Phone? It may be because of the missing or the corrupted drivers on your computer. To fix CMX Aquila 080-1008 not showing up on PC, download CMX Aquila 080-1008 USB Drivers and install them on your computer.
CMX USB Drivers are a must to establish a stable connection between your computer and phone over USB. If you’re looking for CMX Aquila 080-1008 USB drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then you can download them from the downloads section below. On this page, we have shared official OEM USB Drivers for CMX Aquila 080-1008 along with ADB interface drivers and Fastboot drivers.
CMX Aquila 080-1008 Android USB Drivers help securely connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents to and from phone to computer or laptop. If you’re facing an Android file transfer not working issue, then it is recommended to install CMX Aquila 080-1008 drivers on your computer.
The CMX Aquila 080-1008 ADB driver and Fastboot driver allows you to pass ADB commands and Fastboot commands from your computer and perform certain operations on your phone.
Download CMX Aquila 080-1008 USB Driver
The CMX Phone drivers offered here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It also allows you to transfer media, documents, and other files between your phone and computer.
CMX Aquila 080-1008 Driver for Flashing Firmware
How to install: Follow Tutorial
CMX Aquila 080-1008 USB Driver for normal connecting to PC
How to install: Follow Tutorial
The CMX Aquila 080-1008 Fastboot and ADB drivers can be downloaded below.
CMX Aquila 080-1008 ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: CMX Aquila 097-1016 USB Drivers
How to Install CMX Aquila 080-1008 Amlogic USB Drivers
- Download the Amlogic USB Driver package and extract it to Desktop on your computer.
- When extracted, open the folder and run Amlogic Driver installer (InstallDriver.exe) as administrator.
- Click Next when the Device Driver Installation Wizard window opens.
- Now, the Amlogic Driver will be installed. Once installed, click on Finish to close the setup window.
- Finally, reboot your computer.
How to Install CMX Aquila 080-1008 USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
- Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
- When the Device Manager window opens, click on your Computer name.
- Now click on Action and then click on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now click on Show All Devices from the list and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Now select the Android ADB Interface driver from the list and click on Next.
- In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install CMX Aquila 080-1008 Android USB Drivers
How to Install CMX Aquila 080-1008 ADB and Fastboot Drivers
- Download and extract the 15 seconds ADB installer zip package on your computer.
- Now right click on the adb installer setup exe file and click on Run as administrator.
- Now a command prompt window should open.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
- Now, the ADB driver and Fastboot driver installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the "Device Driver Installation Wizard" window should open.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.
Video Tutorial: How to Install CMX Aquila 080-1008 ADB and Fastboot Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY