CoolPad 5890 USB Drivers (DOWNLOAD)

Facing trouble connecting CoolPad 5890 to a computer using a USB cable? Computer not recognizing USB when CoolPad 5890 is connected to PC? It might be because of the missing CoolPad 5890 USB drivers or bad or corrupted drivers. To fix the CoolPad 5890 not showing up on the computer, download CoolPad 5890 USB Drivers and install them on your Windows computer.

Most computers don’t have proper Google Android USB Drivers installed, so it is required to download Coolpad USB Drivers and install them on your computer. Once the Coolpad drivers are installed, we can adequately connect CoolPad 5890 to the Computer or Laptop using a USB data cable. You can download official USB Drivers for CoolPad 5890 along with ADB interface drivers and fastboot drivers on this page.

With CoolPad 5890 Android USB Drivers installed, we can establish a secure connection between a computer and a smartphone. It helps transfer files and data like images, videos, and documents between the computer and the mobile phone through MTP (Media Transfer Protocol).

With the CoolPad 5890 ADB driver and Fastboot driver, we can pass ADB commands and Fastboot commands to the phone from the computer via Command Prompt (CMD) and perform certain operations.

Download CoolPad 5890 USB Driver

The Coolpad Mobile Phone drivers provided here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlocking Bootloader, etc. They can also be used for common purposes like transferring media, files, and documents to and from phone to computer.

CoolPad 5890 Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

CoolPad 5890 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The CoolPad 5890 Fastboot and ADB drivers can be downloaded below.

CoolPad 5890 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: CoolPad 7295 USB Drivers

How to Install CoolPad 5890 USB Drivers Manually

Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
Once the Device Manager window loads, click on your Computer name.
Now click on Action and then select Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.

Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now select Show All Devices and click on Next.
Now click on Have Disk… to launch the Install From Disk window.
Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.

Select the Android ADB Interface driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install CoolPad 5890 Android USB Drivers

Subscribe to Android USB Drivers

How to Install CoolPad 5890 ADB and Fastboot Drivers

Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.

Now, right-click on the ADB driver installer setup file and select Run as administrator.
Now a command prompt window should load on your computer.
It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
Now, the ADB and Fastboot driver installation process should start.

When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
Now the "Device Driver Installation Wizard" window should pop-up.
Click on Next to install the Google USB Drivers (WinUSB).
Once the installation process is completed, click on Finish and reboot your computer.