Dimo K300 USB Drivers (DOWNLOAD) - Android USB Drivers

Dimo K300 phone having difficulty connecting to a computer? Windows computer not recognizing Dimo K300 Android Phone? It may be because of the missing or the corrupted drivers on your computer. To fix Dimo K300 not showing up on PC, download Dimo K300 USB Drivers and install them on your computer.

Dimo USB Drivers are a must to establish a stable connection between your computer and phone over USB. If you’re looking for Dimo K300 USB drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then you can download them from the downloads section below. On this page, we have shared official OEM USB Drivers for Dimo K300 along with ADB interface drivers and Fastboot drivers.

Dimo K300 Android USB Drivers help securely connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents to and from phone to computer or laptop. If you’re facing an Android file transfer not working issue, then it is recommended to install Dimo K300 drivers on your computer.

The Dimo K300 ADB driver and Fastboot driver allows you to pass ADB commands and Fastboot commands from your computer and perform certain operations on your phone.

Download Dimo K300 USB Driver

The Dimo Phone drivers offered here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It also allows you to transfer media, documents, and other files between your phone and computer.

Dimo K300 SPD Unisoc Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Dimo K300 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Dimo K300 Fastboot and ADB drivers can be downloaded below.

Dimo K300 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

How to Install Dimo K300 SPD Unisoc Drivers

Download the Spreadtrum SPD Unisoc Driver package and extract it on your computer.
When extracted, open the Win7, Win8, or Win10 folder depending on your Windows OS version.
Right-click on the DPInst64.exe (64-bit system) or DPInst32.exe (32-bit system) depending on your System Type and select Run as administrator. You can check the System Type by pressing Windows + Pause keys.
The UNISOC Driver Installation Package wizard should open.
Click on the Next button to proceed to install SPD Unisoc USB Drivers on your computer.

Wait for the installation process to complete; when completed, click on the Finish button.
Finally, reboot your computer.

How to Install Dimo K300 USB Drivers Manually

Download and extract the latest Android USB Driver (latest_usb_driver_windows.zip) file to Desktop on your computer.
Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
Now click on your Computer name in the Device Manager window.
Now click on Action and then click on Add legacy hardware.

Now Add Hardware Wizard window should open. Click on Next to continue.
Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Select Show All Devices from the list and click on Next.
In the next screen, click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.

Now select android_winusb.inf driver file and click on Open and then on OK.
Now select the Android ADB Interface driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install Dimo K300 Android USB Drivers

Subscribe to Android USB Drivers

How to Install Dimo K300 ADB and Fastboot Drivers

Download and extract the 15 Seconds ADB installer zip file on your computer. Once extracted, you'll find the ADB driver installer setup file.
Right-click on the ADB installer setup file and select Run as administrator.
Now 15 seconds ADB driver installer command prompt window should open on your computer.
It should ask whether you want to install the ADB driver and Fastboot driver. Press the Y key and then press Enter.
Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.

Now, the ADB and Fastboot driver installation process should begin.
When the ADB driver installation is finished, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
Now the "Device Driver Installation Wizard" window should pop-up.
Click on Next to begin installing Google USB Drivers (WinUSB).
Once the installation process is completed, click on Finish and restart your computer.