Dimo Sarv5 Plus USB Drivers (DOWNLOAD)

Windows computer not recognizing Dimo Sarv5 Plus Phone? Or Dimo Sarv5 Plus android phone won’t connect to the PC? It can be the result of missing Dimo Sarv5 Plus USB drivers or bad or corrupted drivers. To fix Dimo Sarv5 Plus Android phone not showing up on PC, download the Dimo Sarv5 Plus USB driver and install it on your computer.

Dimo USB drivers are essential to efficiently connect Dimo Sarv5 Plus to Computer and Laptop using a USB cable. On this page, we have managed to share the official Dimo Sarv5 Plus USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Apart from the official USB Driver for Dimo Sarv5 Plus, we have also shared Dimo Sarv5 Plus ADB interface drivers and Fastboot drivers.

The Dimo Sarv5 Plus Android USB driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to the computer so that you can transfer images, videos, documents, and other files between the phone and computer. Thus it will fix the android file transfer not working issue.

The Dimo Sarv5 Plus ADB driver and Fastboot driver allow you to pass ADB and Fastboot commands from the PC to perform certain operations on your phone.

Download Dimo Sarv5 Plus USB Driver

The Dimo mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes like transferring media and files to and from mobile to PC.

Dimo Sarv5 Plus SPD Unisoc Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Dimo Sarv5 Plus USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Dimo Sarv5 Plus Fastboot and ADB drivers can be downloaded below.

Dimo Sarv5 Plus ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Dimo 900 Plus USB Drivers

How to Install Dimo Sarv5 Plus SPD Unisoc Drivers

Download the Spreadtrum SPD Unisoc USB Driver package and extract it on your computer.
Once the SPD Unisoc Driver package is extracted, open the Win7, Win8, or Win10 folder, depending on your Windows OS version.
Run DPInst64.exe as administrator if you have a 64-bit system; otherwise, run DPInst32.exe as administrator if you have a 32-bit system. You can check your System Type by pressing Windows and Pause keys together.
Now, the UNISOC Driver Installation Package installer should launch on your computer.
Click on Next to proceed with the SPD Unisoc Driver installation process.

Click on Finish when the driver installation process is completed.
Finally, reboot your computer.

How to Install Dimo Sarv5 Plus USB Drivers Manually

Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
When the Device Manager window opens, click on your Computer name.
Now click on Action and then click on Add legacy hardware.

Now Add Hardware Wizard window should open. Click on Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now click on Show All Devices from the list and click on Next.
Now click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.

Now select android_winusb.inf driver file and click on Open and then on OK.
Now select the Android ADB Interface driver from the list and click on Next.
In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install Dimo Sarv5 Plus Android USB Drivers

Subscribe to Android USB Drivers

How to Install Dimo Sarv5 Plus ADB and Fastboot Drivers

Download and extract the 15 seconds ADB installer zip package on your computer.
Now right click on the adb installer setup exe file and click on Run as administrator.
Now a command prompt window should open.
It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.

Now, the ADB driver and Fastboot driver installation process should begin.
When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
Now the "Device Driver Installation Wizard" window should open.
Click on Next to install the Google USB Drivers (WinUSB).
Once installed, click on Finish and restart your computer.