Genx GXPAD380G USB Drivers (DOWNLOAD)

Genx GXPAD380G phone having difficulty connecting to a computer? Windows computer not recognizing Genx GXPAD380G Android Phone? It may be because of the missing or the corrupted drivers on your computer. To fix Genx GXPAD380G not showing up on PC, download Genx GXPAD380G USB Drivers and install them on your computer.

GenX USB Drivers are a must to establish a stable connection between your computer and phone over USB. If you’re looking for Genx GXPAD380G USB drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then you can download them from the downloads section below. On this page, we have shared official OEM USB Drivers for Genx GXPAD380G along with ADB interface drivers and Fastboot drivers.

Genx GXPAD380G Android USB Drivers help securely connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents to and from phone to computer or laptop. If you’re facing an Android file transfer not working issue, then it is recommended to install Genx GXPAD380G drivers on your computer.

The Genx GXPAD380G ADB driver and Fastboot driver allows you to pass ADB commands and Fastboot commands from your computer and perform certain operations on your phone.

Download Genx GXPAD380G USB Driver

The GenX Phone drivers offered here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It also allows you to transfer media, documents, and other files between your phone and computer.

Genx GXPAD380G Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Genx GXPAD380G USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Genx GXPAD380G Fastboot and ADB drivers can be downloaded below.

Genx GXPAD380G ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Genx GXPAD385G USB Drivers

How to Install Genx GXPAD380G USB Drivers Manually

Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
Once the Device Manager window loads, click on your Computer name.
Now click on Action and then select Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.

Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now select Show All Devices and click on Next.
Now click on Have Disk… to launch the Install From Disk window.
Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.

Select the Android ADB Interface driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install Genx GXPAD380G Android USB Drivers

Subscribe to Android USB Drivers

How to Install Genx GXPAD380G ADB and Fastboot Drivers

Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.

Now, right-click on the ADB driver installer setup file and select Run as administrator.
Now a command prompt window should load on your computer.
It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
Now, the ADB and Fastboot driver installation process should start.

When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
Now the "Device Driver Installation Wizard" window should pop-up.
Click on Next to install the Google USB Drivers (WinUSB).
Once the installation process is completed, click on Finish and reboot your computer.