i.Robot Marble S4 USB Drivers (DOWNLOAD)

Computer not recognizing USB when i.Robot Marble S4 is connected to PC using a USB cable? i.Robot Marble S4 phone not showing up on PC? It might be a driver problem, or your computer might be missing the required i.Robot Marble S4 USB Drivers. To fix the issue, download i.Robot Marble S4 USB Driver and install them on your computer.

Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download I.Robot USB Drivers and install them on your computer to properly connect i.Robot Marble S4 to a Computer or Laptop using a USB cable. Here on this page, we have shared the official i.Robot Marble S4 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8.

Apart from the official USB Driver for i.Robot Marble S4, we have also shared ADB interface drivers and Fastboot drivers for i.Robot Marble S4.

The i.Robot Marble S4 Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.

The i.Robot Marble S4 ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.

Download i.Robot Marble S4 USB Driver

The I.Robot Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.

i.Robot Marble S4 Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

i.Robot Marble S4 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The i.Robot Marble S4 Fastboot and ADB drivers can be downloaded below.

i.Robot Marble S4 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: i.Robot Paladin Evo USB Drivers

How to Install i.Robot Marble S4 USB Drivers Manually

Download and extract the latest Android USB Driver (latest_usb_driver_windows.zip) file to Desktop on your computer.
Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
Now click on your Computer name in the Device Manager window.
Now click on Action and then click on Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.

Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Select Show All Devices from the list and click on Next.
In the next screen, click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.

Now select the Android ADB Interface driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install i.Robot Marble S4 Android USB Drivers

Subscribe to Android USB Drivers

How to Install i.Robot Marble S4 ADB and Fastboot Drivers

Download and extract the 15 Seconds ADB installer zip file on your computer. Once extracted, you'll find the ADB driver installer setup file.

Right-click on the ADB installer setup file and select Run as administrator.
Now 15 seconds ADB driver installer command prompt window should open on your computer.
It should ask whether you want to install the ADB driver and Fastboot driver. Press the Y key and then press Enter.
Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
Now, the ADB and Fastboot driver installation process should begin.

When the ADB driver installation is finished, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
Now the "Device Driver Installation Wizard" window should pop-up.
Click on Next to begin installing Google USB Drivers (WinUSB).
Once the installation process is completed, click on Finish and restart your computer.