i.Robot Megatron USB Drivers

i.Robot Megatron phone not showing up on the PC? Or i.Robot Megatron phone won’t connect to a computer? It might be because of the missing i.Robot Megatron USB drivers or corrupted drivers. To fix the problem, download the i.Robot Megatron USB driver and install it on your computer.

I.Robot USB drivers are required to connect i.Robot Megatron to a Computer or Laptop via USB cable. If you’re looking for a i.Robot Megatron USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then we have got you covered. We have shared the official USB Driver for i.Robot Megatron along with the ADB interface drivers and Fastboot drivers on this page.

With i.Robot Megatron Android USB Driver installed, we can connect the device to the computer as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files between the two devices.

i.Robot Megatron ADB Driver and Fastboot Driver enable you to pass ADB commands and Fastboot commands from the computer to perform certain operations on your phone.

Download i.Robot Megatron USB Driver

The I.Robot mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.

i.Robot Megatron SPD Unisoc Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

i.Robot Megatron USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The i.Robot Megatron Fastboot and ADB drivers can be downloaded below.

i.Robot Megatron ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: i.Robot 7260 USB Drivers

How to Install i.Robot Megatron SPD Unisoc Drivers

1. First of all, download the Spreadtrum SPD Unisoc USB Driver package and extract it on your computer.
2. After extracting the SPD Unisoc driver package, open the Win7, Win8, or Win10 folder depending on your Windows OS version.
3. Now, depending upon your System Type, run DPInst64.exe (64-bit system) or DPInst32.exe (32-bit system) as administrator on your computer. You can check the System Type by pressing Windows + Pause keys.
4. Now, the UNISOC Driver Installation Package installation window should open.
5. Click on Next to install the SPD Unisoc Drivers on your computer.
6. When the driver installation process is completed, click on Finish.
7. Now, reboot your computer.

How to Install i.Robot Megatron USB Drivers Manually

1. Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
2. Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Once the Device Manager window loads, click on your Computer name.
4. Now click on Action and then select Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now select Show All Devices and click on Next.
8. Now click on Have Disk… to launch the Install From Disk window.
9. Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf driver file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install i.Robot Megatron Android USB Drivers

How to Install i.Robot Megatron ADB and Fastboot Drivers

1. Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
2. Now, right-click on the ADB driver installer setup file and select Run as administrator.
3. Now a command prompt window should load on your computer.
4. It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
5. Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
6. Now, the ADB and Fastboot driver installation process should start.
7. When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
8. Now the "Device Driver Installation Wizard" window should pop-up.
9. Click on Next to install the Google USB Drivers (WinUSB).
10. Once the installation process is completed, click on Finish and reboot your computer.

Video Tutorial: How to Install i.Robot Megatron ADB and Fastboot Drivers