iBall 3.5F Grabit USB Drivers (DOWNLOAD)

Does your iBall 3.5F Grabit phone not connecting to a PC? or a Computer is not recognizing iBall 3.5F Grabit when connected using a USB cable? It can be because of the missing iBall 3.5F Grabit USB Driver or corrupted Android USB Driver. To fix the problem, download iBall 3.5F Grabit USB Drivers and install them on your Windows computer.

iBall USB Drivers are necessary to connect iBall 3.5F Grabit to a Computer or Laptop via USB data cable. On this page, you can download official iBall 3.5F Grabit USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Along with the official USB Driver for iBall 3.5F Grabit, we have also shared iBall 3.5F Grabit ADB interface drivers and Fastboot drivers.

iBall 3.5F Grabit Android USB Drivers helps in establishing a secure connection between your computer and mobile phone. It helps to transfer data like images, videos, documents, and other files to and from your mobile to computer through MTP (Media Transfer Protocol).

The iBall 3.5F Grabit ADB driver and Fastboot driver allow you to pass ADB commands and Fastboot commands from your computer to your phone and perform certain operations.

Download iBall 3.5F Grabit USB Driver

The iBall Mobile drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. They can also be used for general purposes like transferring media, documents, and other files to and from phone to computer.

iBall 3.5F Grabit Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

iBall 3.5F Grabit USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The iBall 3.5F Grabit Fastboot and ADB drivers can be downloaded below.

iBall 3.5F Grabit ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: iBall Andi Tiger USB Drivers

How to Install iBall 3.5F Grabit USB Drivers Manually

Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
Once the Device Manager window loads, click on your Computer name.
Now click on Action and then select Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.

Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now select Show All Devices and click on Next.
Now click on Have Disk… to launch the Install From Disk window.
Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.

Select the Android ADB Interface driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install iBall 3.5F Grabit Android USB Drivers

Subscribe to Android USB Drivers

How to Install iBall 3.5F Grabit ADB and Fastboot Drivers

Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.

Now, right-click on the ADB driver installer setup file and select Run as administrator.
Now a command prompt window should load on your computer.
It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
Now, the ADB and Fastboot driver installation process should start.

When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
Now the "Device Driver Installation Wizard" window should pop-up.
Click on Next to install the Google USB Drivers (WinUSB).
Once the installation process is completed, click on Finish and reboot your computer.