Itel A509W USB Drivers

Itel A509W phone not connecting to PC only charging? Or Itel A509W phone not showing up on the computer? It may be caused by the missing Itel A509W USB drivers or corrupted drivers. To fix the problem of the Itel A509W phone won’t connect to a computer, download the Itel A509W USB driver, and install it on your computer.

To properly connect Itel A509W to a Computer or Laptop using a USB cable, itel USB drivers must be installed on your Windows computer. If you’re wondering where you can download the Itel A509W USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, or Windows 8, then we have got you covered. Here on this page, we have shared the official USB driver for Itel A509W and the ADB interface drivers, and Fastboot drivers.

Once the Itel A509W Android USB Driver is installed, you’ll be able to connect Itel A509W to a computer as an MTP USB device (MTP Transfer Protocol). When connected as an MTP device, you can transfer images, videos, documents, and other files to and from your phone to your computer.

If you have installed the Itel A509W ADB driver and Fastboot driver on your computer, then you can pass ADB commands and Fastboot commands to perform certain operations on your phone from your computer.

Download Itel A509W USB Driver

The itel Mobile Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlocking bootloader, etc. It can also be used for general purposes like transferring media, documents, and other files from phone to computer and vice versa.

Itel A509W SPD Unisoc Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Itel A509W USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Itel A509W Fastboot and ADB drivers can be downloaded below.

Itel A509W ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Itel A24 L5007O USB Drivers

How to Install Itel A509W SPD Unisoc Drivers

1. Download the latest Spreadtrum SPD Unisoc USB Driver and extract it on your computer.
2. After extracting the drivers, open the Win7, Win8, or Win10 folder depending on your Windows OS version.
3. If you have a 64-bit system, right-click on the DPInst64.exe; otherwise, right-click on the DPInst32.exe and select Run as administrator. You can check your System Type by pressing Windows and Pause keys together.
4. The UNISOC Driver Installation Package wizard window should open on your computer.
5. To continue with the SPD Unisoc Driver installation, click on the Next button.
6. When the drivers are installed, click on the Finish button.
7. Now, reboot your computer.

How to Install Itel A509W USB Drivers Manually

1. Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
2. Open the Device Manager on your computer by searching device manager from Windows Start Menu.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then select Add legacy hardware.
5. Add Hardware Wizard window should open, click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. On the next screen, click on Have Disk… to open the Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install Itel A509W Android USB Drivers

How to Install Itel A509W ADB and Fastboot Drivers

1. Download and extract 15 seconds ADB installer on your computer.
2. Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
3. Now a command prompt window with a blue background and white text should open.
4. It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
6. Now, the ADB driver and Fastboot driver installation process should begin.
7. When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
8. Now the "Device Driver Installation Wizard" window should open.
9. Click on Next to continue installing the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and reboot your computer.

Video Tutorial: How to Install Itel A509W ADB and Fastboot Drivers