Meizu Note 9 USB Drivers

Computer not recognizing USB when Meizu Note 9 is connected to PC using a USB cable? Meizu Note 9 phone not showing up on PC? It might be a driver problem, or your computer might be missing the required Meizu Note 9 USB Drivers. To fix the issue, download Meizu Note 9 USB Driver and install them on your computer.

Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download Meizu USB Drivers and install them on your computer to properly connect Meizu Note 9 to a Computer or Laptop using a USB cable. Here on this page, we have shared the official Meizu Note 9 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8.

Apart from the official USB Driver for Meizu Note 9, we have also shared ADB interface drivers and Fastboot drivers for Meizu Note 9.

The Meizu Note 9 Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.

The Meizu Note 9 ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.

Download Meizu Note 9 USB Driver

The Meizu Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.

Meizu Note 9 Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Meizu Note 9 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Meizu Note 9 Fastboot and ADB drivers can be downloaded below.

Meizu Note 9 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Meizu M8 USB Drivers

How to Install Meizu Note 9 Qualcomm USB Drivers

1. Download and extract qualcomm-driver.zip (Qualcomm USB Driver) package to Desktop on your computer.
2. Once extracted, you'll find Qualcomm Driver setup (Qualcomm_USB_Driver_V1.0.exe) file.
3. Right-click on the Qualcomm USB Driver setup file and choose Run as administrator.
4. Qualcomm USB Drivers for Windows – InstallShield Wizard window should load. Select ETHERNET-DHCP is used to get the IPAddress option and click on Next.
5. Click on Next again to proceed with the Qualcomm Drivers installation process.
6. Now accept terms and conditions in the license agreement and click on Next.
7. Now click on Install to start the Qualcomm HS-USB Driver installation.
8. If a Windows Security window asking "Would you like to install this device software?" pops-up click on Install.
9. When the drivers are installed, click on Finish.
10. Finally, restart your computer.

How to Install Meizu Note 9 USB Drivers Manually

1. Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
2. Open the Device Manager on your computer by searching device manager from Windows Start Menu.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then select Add legacy hardware.
5. Add Hardware Wizard window should open, click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. On the next screen, click on Have Disk… to open the Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install Meizu Note 9 Android USB Drivers

How to Install Meizu Note 9 ADB and Fastboot Drivers

1. Download and extract 15 seconds ADB installer on your computer.
2. Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
3. Now a command prompt window with a blue background and white text should open.
4. It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
6. Now, the ADB driver and Fastboot driver installation process should begin.
7. When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
8. Now the "Device Driver Installation Wizard" window should open.
9. Click on Next to continue installing the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and reboot your computer.

Video Tutorial: How to Install Meizu Note 9 ADB and Fastboot Drivers