Nikai NMID1010 phone not connecting to PC only charging? Computer having trouble detecting the Nikai NMID1010 Android phone? It may be caused by the missing Nikai NMID1010 USB Driver or corrupted drivers. To fix Nikai NMID1010 phone not showing up on PC, download Nikai NMID1010 USB Drivers and install them on your computer.
Nikai USB Drivers are essential to seamlessly connect Nikai NMID1010 to a Computer or Laptop over USB. Without the Nikai NMID1010 drivers, the connection will not work, and your computer will have a hard time detecting your phone. On this page, you can download official Nikai NMID1010 USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, along with Nikai NMID1010 ADB interface drivers and Fastboot drivers.
The Nikai NMID1010 Android USB Drivers allows you to establish a secure and reliable connection between your phone and the computer over the USB connection. It will enable you to connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents between your phone and the computer.
The Nikai NMID1010 ADB Driver and Fastboot Driver allows you to pass ADB commands and Fastboot commands right from your computer and perform certain operations on your phone.
Download Nikai NMID1010 USB Driver
The Nikai Mobile Drivers provided here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlock Bootloader, etc. It also allows you to transfer media, documents, and other files to and from your phone to your computer.
Nikai NMID1010 Driver for Flashing Firmware
How to install: Follow Tutorial
Nikai NMID1010 USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Nikai NMID1010 Fastboot and ADB drivers can be downloaded below.
Nikai NMID1010 ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Nikai NMID7004G USB Drivers
How to Install Nikai NMID1010 Amlogic USB Drivers
- Download and extract the Amlogic Driver package on your computer.
- After extracting, open the folder and launch Amlogic USB Driver setup (InstallDriver.exe) as administrator.
- When the Device Driver Installation Wizard window opens, click on Next to begin installing the drivers.
- Wait for the Amlogic USB Driver to install. When installed, click on Finish to exit the setup wizard.
- Finally, reboot your computer.
How to Install Nikai NMID1010 USB Drivers Manually
- Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
- Open the Device Manager on your computer by searching device manager from Windows Start Menu.
- Now click on your Computer name in the Device Manager window.
- Now click on Action and then select Add legacy hardware.
- Add Hardware Wizard window should open, click on Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Select Show All Devices from the list and click on Next.
- On the next screen, click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
Video Tutorial: How to Install Nikai NMID1010 Android USB Drivers
How to Install Nikai NMID1010 ADB and Fastboot Drivers
- Download and extract 15 seconds ADB installer on your computer.
- Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
- Now a command prompt window with a blue background and white text should open.
- It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
- Now, the ADB driver and Fastboot driver installation process should begin.
- When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
- Now the "Device Driver Installation Wizard" window should open.
- Click on Next to continue installing the Google USB Drivers (WinUSB).
- Once installed, click on Finish and reboot your computer.
Video Tutorial: How to Install Nikai NMID1010 ADB and Fastboot Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY