Pipo SM7079E USB Drivers

Does your Pipo SM7079E phone not connecting to a PC? or a Computer is not recognizing Pipo SM7079E when connected using a USB cable? It can be because of the missing Pipo SM7079E USB Driver or corrupted Android USB Driver. To fix the problem, download Pipo SM7079E USB Drivers and install them on your Windows computer.

Pipo USB Drivers are necessary to connect Pipo SM7079E to a Computer or Laptop via USB data cable. On this page, you can download official Pipo SM7079E USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Along with the official USB Driver for Pipo SM7079E, we have also shared Pipo SM7079E ADB interface drivers and Fastboot drivers.

Pipo SM7079E Android USB Drivers helps in establishing a secure connection between your computer and mobile phone. It helps to transfer data like images, videos, documents, and other files to and from your mobile to computer through MTP (Media Transfer Protocol).

The Pipo SM7079E ADB driver and Fastboot driver allow you to pass ADB commands and Fastboot commands from your computer to your phone and perform certain operations.

Download Pipo SM7079E USB Driver

The Pipo Mobile drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. They can also be used for general purposes like transferring media, documents, and other files to and from phone to computer.

Pipo SM7079E Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Pipo SM7079E USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Pipo SM7079E Fastboot and ADB drivers can be downloaded below.

Pipo SM7079E ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Pipo U3 USB Drivers

How to Install Pipo SM7079E Rockchip USB Drivers

1. Download and extract the Rockchip Driver package to your computer.
2. Open the extracted folder and run Rockchip Driver Assistant (DriverInstall.exe) as administrator.
3. Now, the RK Driver Assistant window should load.
4. Click on Install Driver to begin installing Rockchip USB Driver on your computer.
5. Click on Install when a Windows Security window pops-up, asking, "Would you like to install this device software?".
6. Once the RK Drivers are installed, a window should pop-up with the message "Install driver ok".
7. Click on OK to exit the setup and restart your computer.

How to Install Pipo SM7079E USB Drivers Manually

1. Download and extract the latest_usb_driver_windows.zip package on your computer.
2. Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Once the Device Manager window opens, click on your Computer name.
4. Now click on Action and then on Add legacy hardware.
5. Now Add Hardware Wizard window should pop-up. Click on Next to continue.
6. In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now select Show All Devices and click on Next.
8. Now click on Have Disk… to open the Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install Pipo SM7079E Android USB Drivers

How to Install Pipo SM7079E ADB and Fastboot Drivers

1. Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.
2. Now right click on the adb driver installer setup file and click on Run as administrator.
3. Now you'll see a command prompt window with a blue background and white text.
4. It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
6. Now, the ADB and Fastboot installation process should begin.
7. When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
8. Now the "Device Driver Installation Wizard" window should open.
9. Click on Next to continue installing the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and restart your computer.

Video Tutorial: How to Install Pipo SM7079E ADB and Fastboot Drivers