Facing trouble connecting Positivo T810C to a computer using a USB cable? Computer not recognizing USB when Positivo T810C is connected to PC? It might be because of the missing Positivo T810C USB drivers or bad or corrupted drivers. To fix the Positivo T810C not showing up on the computer, download Positivo T810C USB Drivers and install them on your Windows computer.
Most computers don’t have proper Google Android USB Drivers installed, so it is required to download Positivo USB Drivers and install them on your computer. Once the Positivo drivers are installed, we can adequately connect Positivo T810C to the Computer or Laptop using a USB data cable. You can download official USB Drivers for Positivo T810C along with ADB interface drivers and fastboot drivers on this page.
With Positivo T810C Android USB Drivers installed, we can establish a secure connection between a computer and a smartphone. It helps transfer files and data like images, videos, and documents between the computer and the mobile phone through MTP (Media Transfer Protocol).
With the Positivo T810C ADB driver and Fastboot driver, we can pass ADB commands and Fastboot commands to the phone from the computer via Command Prompt (CMD) and perform certain operations.
Download Positivo T810C USB Driver
The Positivo Mobile Phone drivers provided here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlocking Bootloader, etc. They can also be used for common purposes like transferring media, files, and documents to and from phone to computer.
Positivo T810C SPD Unisoc Driver for Flashing Firmware
How to install: Follow Tutorial
Positivo T810C USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Positivo T810C Fastboot and ADB drivers can be downloaded below.
Positivo T810C ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Positivo Tablet T1085 USB Drivers
How to Install Positivo T810C SPD Unisoc Drivers
- First of all, download the Spreadtrum SPD Unisoc USB Driver package and extract it on your computer.
- After extracting the SPD Unisoc driver package, open the Win7, Win8, or Win10 folder depending on your Windows OS version.
- Now, depending upon your System Type, run DPInst64.exe (64-bit system) or DPInst32.exe (32-bit system) as administrator on your computer. You can check the System Type by pressing Windows + Pause keys.
- Now, the UNISOC Driver Installation Package installation window should open.
- Click on Next to install the SPD Unisoc Drivers on your computer.
- When the driver installation process is completed, click on Finish.
- Now, reboot your computer.
How to Install Positivo T810C USB Drivers Manually
- Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
- Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window loads, click on your Computer name.
- Now click on Action and then select Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to launch the Install From Disk window.
- Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
Video Tutorial: How to Install Positivo T810C Android USB Drivers
How to Install Positivo T810C ADB and Fastboot Drivers
- Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
- Now, right-click on the ADB driver installer setup file and select Run as administrator.
- Now a command prompt window should load on your computer.
- It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should start.
- When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and reboot your computer.
Video Tutorial: How to Install Positivo T810C ADB and Fastboot Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY