vivo iQOO 9 (China) USB Drivers (DOWNLOAD)

Computer not recognizing USB when vivo iQOO 9 (China) is connected to PC using a USB cable? vivo iQOO 9 (China) phone not showing up on PC? It might be a driver problem, or your computer might be missing the required vivo iQOO 9 (China) USB Drivers. To fix the issue, download vivo iQOO 9 (China) USB Driver and install them on your computer.

Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download Vivo USB Drivers and install them on your computer to properly connect vivo iQOO 9 (China) to a Computer or Laptop using a USB cable. Here on this page, we have shared the official vivo iQOO 9 (China) USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8.

Apart from the official USB Driver for vivo iQOO 9 (China), we have also shared ADB interface drivers and Fastboot drivers for vivo iQOO 9 (China).

The vivo iQOO 9 (China) Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.

The vivo iQOO 9 (China) ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.

Download vivo iQOO 9 (China) USB Driver

The Vivo Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.

vivo iQOO 9 (China) Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

vivo iQOO 9 (China) USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The vivo iQOO 9 (China) Fastboot and ADB drivers can be downloaded below.

vivo iQOO 9 (China) ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: vivo iQOO 7 (India) USB Drivers

How to Install vivo iQOO 9 (China) Qualcomm USB Drivers

First of all, download Qualcomm USB Driver (qualcomm-driver.zip) package on your computer and extract it to Desktop.
Once the Qualcomm Driver package is extracted, you'll find Qualcomm_USB_Driver_V1.0.exe setup file.
Right-click on the Qualcomm USB Driver setup file and click on Run as administrator.
Now Qualcomm USB Drivers for Windows installation wizard window should launch. Select ETHERNET-DHCP is used to get the IPAddress option and click on Next.
Click on Next again to proceed with the Qualcomm Drivers installation on your Windows computer.

Select I accept the terms in the license agreement and click on Next.
Click on Install to begin the Qualcomm HS-USB Driver installation process.
When a Windows Security window pops-up asking "Would you like to install this device software?" Click on Install.
Click on Finish, when the Qualcomm Driver installation process is completed.
Finally, restart your computer.

How to Install vivo iQOO 9 (China) USB Drivers Manually

Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.

Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
Once the Device Manager window loads, click on your Computer name.
Now click on Action and then select Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.
Select Install the hardware that I manually select from a list (Advanced) option and click on Next.

Now select Show All Devices and click on Next.
Now click on Have Disk… to launch the Install From Disk window.
Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.
Select the Android ADB Interface driver from the list and click on Next.

Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install vivo iQOO 9 (China) Android USB Drivers

Subscribe to Android USB Drivers

How to Install vivo iQOO 9 (China) ADB and Fastboot Drivers

Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
Now, right-click on the ADB driver installer setup file and select Run as administrator.

Now a command prompt window should load on your computer.
It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
Now, the ADB and Fastboot driver installation process should start.
When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.

Now the "Device Driver Installation Wizard" window should pop-up.
Click on Next to install the Google USB Drivers (WinUSB).
Once the installation process is completed, click on Finish and reboot your computer.