A-Rival Bioniq 1001 USB Drivers (DOWNLOAD)

Does your A-Rival Bioniq 1001 phone not connecting to a PC? or a Computer is not recognizing A-Rival Bioniq 1001 when connected using a USB cable? It can be because of the missing A-Rival Bioniq 1001 USB Driver or corrupted Android USB Driver. To fix the problem, download A-Rival Bioniq 1001 USB Drivers and install them on your Windows computer.

A-Rival USB Drivers are necessary to connect A-Rival Bioniq 1001 to a Computer or Laptop via USB data cable. On this page, you can download official A-Rival Bioniq 1001 USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Along with the official USB Driver for A-Rival Bioniq 1001, we have also shared A-Rival Bioniq 1001 ADB interface drivers and Fastboot drivers.

A-Rival Bioniq 1001 Android USB Drivers helps in establishing a secure connection between your computer and mobile phone. It helps to transfer data like images, videos, documents, and other files to and from your mobile to computer through MTP (Media Transfer Protocol).

The A-Rival Bioniq 1001 ADB driver and Fastboot driver allow you to pass ADB commands and Fastboot commands from your computer to your phone and perform certain operations.

Download A-Rival Bioniq 1001 USB Driver

The A-Rival Mobile drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. They can also be used for general purposes like transferring media, documents, and other files to and from phone to computer.

A-Rival Bioniq 1001 CDC Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

A-Rival Bioniq 1001 VCOM Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

A-Rival Bioniq 1001 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The A-Rival Bioniq 1001 Fastboot and ADB drivers can be downloaded below.

A-Rival Bioniq 1001 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: A-Rival Bioniq 8008 USB Drivers

How to Install A-Rival Bioniq 1001 CDC Drivers

Download and extract the latest Android CDC Driver (android-cdc-driver.zip) file to Desktop on your computer.
Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
Now click on your Computer name in the Device Manager window.
Now click on Action and then click on Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.

Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Select Show All Devices from the list and click on Next.
In the next screen, click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select Android_Gadget_CDC_driver.inf driver file and click on Open and then on OK.

Now select the Android Gadget VCOM Driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
Once all the listed drivers are installed, restart your computer.

How to Install A-Rival Bioniq 1001 VCOM Drivers

Download and extract the latest Google Android VCOM Driver (android-vcom-driver.zip) on your computer.

Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
Once the Device Manager window loads, click on your Computer name.
Now click on Action and then select Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.
Select Install the hardware that I manually select from a list (Advanced) option and click on Next.

Now select Show All Devices and click on Next.
Now click on Have Disk… to launch the Install From Disk window.
Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. Once selected, click on Open and then on OK.
Select the MediaTek DA USB VCOM Port driver from the list and click on Next.

Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
Once all the listed drivers are installed, reboot your computer.

How to Install A-Rival Bioniq 1001 USB Drivers Manually

Download and extract the latest_usb_driver_windows.zip package on your computer.
Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.

Once the Device Manager window opens, click on your Computer name.
Now click on Action and then on Add legacy hardware.
Now Add Hardware Wizard window should pop-up. Click on Next to continue.
In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now select Show All Devices and click on Next.

Now click on Have Disk… to open the Install From Disk window.
Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf file and click on Open and then on OK.
Select the Android ADB Interface driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.

Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.

How to Install A-Rival Bioniq 1001 ADB and Fastboot Drivers

Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.
Now right click on the adb driver installer setup file and click on Run as administrator.
Now you'll see a command prompt window with a blue background and white text.

It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
Now, the ADB and Fastboot installation process should begin.
When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
Now the "Device Driver Installation Wizard" window should open.