Alcatel OneTouch Snap LTE phone not connecting to PC only charging? Computer having trouble detecting the Alcatel OneTouch Snap LTE Android phone? It may be caused by the missing Alcatel OneTouch Snap LTE USB Driver or corrupted drivers. To fix Alcatel OneTouch Snap LTE phone not showing up on PC, download Alcatel OneTouch Snap LTE USB Drivers and install them on your computer.
Alcatel USB Drivers are essential to seamlessly connect Alcatel OneTouch Snap LTE to a Computer or Laptop over USB. Without the Alcatel OneTouch Snap LTE drivers, the connection will not work, and your computer will have a hard time detecting your phone. On this page, you can download official Alcatel OneTouch Snap LTE USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, along with Alcatel OneTouch Snap LTE ADB interface drivers and Fastboot drivers.
The Alcatel OneTouch Snap LTE Android USB Drivers allows you to establish a secure and reliable connection between your phone and the computer over the USB connection. It will enable you to connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents between your phone and the computer.
The Alcatel OneTouch Snap LTE ADB Driver and Fastboot Driver allows you to pass ADB commands and Fastboot commands right from your computer and perform certain operations on your phone.
Table of Contents
Download Alcatel OneTouch Snap LTE USB Driver
The Alcatel Mobile Drivers provided here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlock Bootloader, etc. It also allows you to transfer media, documents, and other files to and from your phone to your computer.
Alcatel OneTouch Snap LTE Driver for Flashing Firmware
How to install: Follow Tutorial
Alcatel OneTouch Snap LTE USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Alcatel OneTouch Snap LTE Fastboot and ADB drivers can be downloaded below.
Alcatel OneTouch Snap LTE ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Alcatel OneTouch Snap USB Drivers
How to Install Alcatel OneTouch Snap LTE USB Drivers Manually
- Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
- Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window loads, click on your Computer name.
- Now click on Action and then select Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to launch the Install From Disk window.
- Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
How to Install Alcatel OneTouch Snap LTE ADB and Fastboot Drivers
- Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
- Now, right-click on the ADB driver installer setup file and select Run as administrator.
- Now a command prompt window should load on your computer.
- It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should start.
- When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and reboot your computer.
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY