Computer not recognizing USB when Elitek MX2 is connected to PC using a USB cable? Elitek MX2 phone not showing up on PC? It might be a driver problem, or your computer might be missing the required Elitek MX2 USB Drivers. To fix the issue, download Elitek MX2 USB Driver and install them on your computer.
Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download Elitek USB Drivers and install them on your computer to properly connect Elitek MX2 to a Computer or Laptop using a USB cable. Here on this page, we have shared the official Elitek MX2 USB driver for Windows 10, Windows 7, Windows 8.1, and Windows 8.
Apart from the official USB Driver for Elitek MX2, we have also shared ADB interface drivers and Fastboot drivers for Elitek MX2.
The Elitek MX2 Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.
The Elitek MX2 ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.
Table of Contents
- 1 Download Elitek MX2 USB Driver
- 2 How to Install Elitek MX2 SPD Unisoc Drivers
- 3 How to Install Elitek MX2 USB Drivers Manually
- 4 How to Install Elitek MX2 ADB and Fastboot Drivers
Download Elitek MX2 USB Driver
The Elitek Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.
Elitek MX2 SPD Unisoc Driver for Flashing Firmware
Elitek MX2 USB Driver for normal connecting to PC
The Elitek MX2 Fastboot and ADB drivers can be downloaded below.
Elitek MX2 ADB and Fastboot Drivers
How to Install Elitek MX2 SPD Unisoc Drivers
- Download and extract the latest Spreadtrum SPD Unisoc Driver on your computer.
- Now, open the Win7, Win8, or Win10 folder on your computer, depending upon your Windows version.
- If your System Type is 64-bit, right-click on the DPInst64.exe and select Run as administrator. For 32-bit System Type, right-click on the DPInst32.exe and choose Run as administrator (you can check System Type by pressing Windows + Pause keys).
- Now, the UNISOC Driver Installation Package wizard window should open on your computer.
- Click on the Next button to continue with the SPD UNISOC Driver installation process.
- Click on Finish when the UNISOC Driver Installation Package wizard is successful.
- Finally, reboot your computer.
How to Install Elitek MX2 USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip package on your computer.
- Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window opens, click on your Computer name.
- Now click on Action and then on Add legacy hardware.
- Now Add Hardware Wizard window should pop-up. Click on Next to continue.
- In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
How to Install Elitek MX2 ADB and Fastboot Drivers
- Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.
- Now right click on the adb driver installer setup file and click on Run as administrator.
- Now you'll see a command prompt window with a blue background and white text.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
- Now, the ADB and Fastboot installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the "Device Driver Installation Wizard" window should open.
- Click on Next to continue installing the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.