• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Android USB Drivers

Database of GSM USB Drivers for all Android Devices

  • Samsung
  • Lenovo
  • Asus
  • OnePlus
  • Vivo
  • Xiaomi
  • Huawei
  • BLU
Home ›› Lava ›› Lava Iris 503

Lava Iris 503 USB Drivers

FacebookTwitterReddit

Lava Iris 503 phone not showing up on the PC? Or Lava Iris 503 phone won’t connect to a computer? It might be because of the missing Lava Iris 503 USB drivers or corrupted drivers. To fix the problem, download the Lava Iris 503 USB driver and install it on your computer.

Lava USB drivers are required to connect Lava Iris 503 to a Computer or Laptop via USB cable. If you’re looking for a Lava Iris 503 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then we have got you covered. We have shared the official USB Driver for Lava Iris 503 along with the ADB interface drivers and Fastboot drivers on this page.

With Lava Iris 503 Android USB Driver installed, we can connect the device to the computer as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files between the two devices.

Lava Iris 503 ADB Driver and Fastboot Driver enable you to pass ADB commands and Fastboot commands from the computer to perform certain operations on your phone.

Table of Contents

  • 1 Download Lava Iris 503 USB Driver
    • 1.1 Lava Iris 503 CDC Driver for Flashing Firmware
    • 1.2 Lava Iris 503 VCOM Driver for Flashing Firmware
    • 1.3 Lava Iris 503 USB Driver for normal connecting to PC
    • 1.4 Lava Iris 503 ADB and Fastboot Drivers
  • 2 How to Install Lava Iris 503 CDC Drivers
  • 3 How to Install Lava Iris 503 VCOM Drivers
  • 4 How to Install Lava Iris 503 USB Drivers Manually
  • 5 How to Install Lava Iris 503 ADB and Fastboot Drivers

Download Lava Iris 503 USB Driver

The Lava mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.

Lava Iris 503 CDC Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Lava Iris 503 VCOM Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Lava Iris 503 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Lava Iris 503 Fastboot and ADB drivers can be downloaded below.

Lava Iris 503 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Lava Iris 504 USB Drivers

How to Install Lava Iris 503 CDC Drivers

  1. Download and extract the latest Android CDC Driver (android-cdc-driver.zip) file to Desktop on your computer.Android CDC Driver - Lava Iris 503 USB Drivers
  2. Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.Windows Start Button Device Manager - Lava Iris 503 USB Drivers
  3. Now click on your Computer name in the Device Manager window.Device Manager Computer Name - Lava Iris 503 USB Drivers
  4. Now click on Action and then click on Add legacy hardware.Device Manager Add legacy hardware - Lava Iris 503 USB Drivers
  5. Now Add Hardware Wizard window should open. Click on Next to continue.Add Hardware Wizard - Lava Iris 503 USB Drivers
  6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.Install Hardware Manually - Lava Iris 503 USB Drivers
  7. Select Show All Devices from the list and click on Next.Show all Hardware Devices - Lava Iris 503 USB Drivers
  8. In the next screen, click on Have Disk… to open the Install From Disk window.Add Hardware Have Disk - Lava Iris 503 USB Drivers
  9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.Install From Disk Browse - Lava Iris 503 USB Drivers
  10. Now select Android_Gadget_CDC_driver.inf driver file and click on Open and then on OK.Android Gadget CDC driver inf - Lava Iris 503 USB Drivers
  11. Now select the Android Gadget VCOM Driver from the list and click on Next.Install Android Gadget CDC VCOM Driver - Lava Iris 503 USB Drivers
  12. Confirm the Hardware driver to install and click on Next to begin the installation process.Install Android CDC Driver - Lava Iris 503 USB Drivers
  13. Once installed, click on Finish.Android CDC VCOM Driver Installed - Lava Iris 503 USB Drivers
  14. Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.Install Android CDC Gadget Serial driver - Lava Iris 503 USB Drivers
  15. Once all the listed drivers are installed, restart your computer.

How to Install Lava Iris 503 VCOM Drivers

  1. Download and extract the latest Google Android VCOM Driver (android-vcom-driver.zip) on your computer.Android VCOM Drivers - Lava Iris 503 USB Drivers
  2. Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.Windows Start Button Device Manager - Lava Iris 503 USB Drivers
  3. Once the Device Manager window loads, click on your Computer name.Device Manager Computer Name - Lava Iris 503 USB Drivers
  4. Now click on Action and then select Add legacy hardware.Device Manager Add legacy hardware - Lava Iris 503 USB Drivers
  5. Now Add Hardware Wizard window should open. Click on Next to continue.Add Hardware Wizard - Lava Iris 503 USB Drivers
  6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.Install Hardware Manually - Lava Iris 503 USB Drivers
  7. Now select Show All Devices and click on Next.Show all Hardware Devices - Lava Iris 503 USB Drivers
  8. Now click on Have Disk… to launch the Install From Disk window.Add Hardware Have Disk - Lava Iris 503 USB Drivers
  9. Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.Install From Disk Browse - Lava Iris 503 USB Drivers
  10. Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. Once selected, click on Open and then on OK.Android VCOM Driver inf - Lava Iris 503 USB Drivers
  11. Select the MediaTek DA USB VCOM Port driver from the list and click on Next.Install MediaTek DA USB VCOM Port - Lava Iris 503 USB Drivers
  12. Confirm the Hardware driver to install and click on Next to begin the installation process.Install Android VCOM Driver - Lava Iris 503 USB Drivers
  13. Once installed, click on Finish.Android VCOM Driver installed - Lava Iris 503 USB Drivers
  14. Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.Install MediaTek PreLoader USB VCOM Port - Lava Iris 503 USB Drivers
  15. Once all the listed drivers are installed, reboot your computer.

How to Install Lava Iris 503 USB Drivers Manually

  1. Download and extract the latest_usb_driver_windows.zip package on your computer.Google Android USB Driver extracted - Lava Iris 503 USB Drivers
  2. Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.Windows Start Button Device Manager - Lava Iris 503 USB Drivers
  3. Once the Device Manager window opens, click on your Computer name.Device Manager Computer Name - Lava Iris 503 USB Drivers
  4. Now click on Action and then on Add legacy hardware.Device Manager Add legacy hardware - Lava Iris 503 USB Drivers
  5. Now Add Hardware Wizard window should pop-up. Click on Next to continue.Add Hardware Wizard - Lava Iris 503 USB Drivers
  6. In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.Install Hardware Manually - Lava Iris 503 USB Drivers
  7. Now select Show All Devices and click on Next.Show all Hardware Devices - Lava Iris 503 USB Drivers
  8. Now click on Have Disk… to open the Install From Disk window.Add Hardware Have Disk - Lava Iris 503 USB Drivers
  9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.Install From Disk Browse - Lava Iris 503 USB Drivers
  10. Now select android_winusb.inf file and click on Open and then on OK.Google Android USB Driver inf - Lava Iris 503 USB Drivers
  11. Select the Android ADB Interface driver from the list and click on Next.Install Android ADB Interface Driver - Lava Iris 503 USB Drivers
  12. Confirm the Hardware driver to install and click on Next to begin the installation process.Android ADB Interface Driver Install - Lava Iris 503 USB Drivers
  13. Once installed, click on Finish.Android ADB Interface Driver Installed - Lava Iris 503 USB Drivers
  14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.Install Android Bootloader Interface Driver - Lava Iris 503 USB Drivers
  15. Once all the listed drivers are installed, reboot your computer.

How to Install Lava Iris 503 ADB and Fastboot Drivers

  1. Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.15 Seconds ADB Installer - Lava Iris 503 USB Drivers
  2. Now right click on the adb driver installer setup file and click on Run as administrator.Open ADB and Fastboot Installer - Lava Iris 503 USB Drivers
  3. Now you'll see a command prompt window with a blue background and white text.ADB and Fastboot installer - Lava Iris 503 USB Drivers
  4. It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.Install ADB and Fastboot Driver - Lava Iris 503 USB Drivers
  5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.Install ADB system wide - Lava Iris 503 USB Drivers
  6. Now, the ADB and Fastboot installation process should begin.
  7. When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.ADB install device drivers - Lava Iris 503 USB Drivers
  8. Now the "Device Driver Installation Wizard" window should open.
  9. Click on Next to continue installing the Google USB Drivers (WinUSB).Install Google Android USB Driver WinUSB - Lava Iris 503 USB Drivers
  10. Once installed, click on Finish and restart your computer.Google USB Driver installation complete - Lava Iris 503 USB Drivers

Important Notes:

[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.

[*] Broken link: Report here.

[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

SHARE ON
TwitterFacebookWhatsAppRedditBufferLinkedInPin It

Reader Interactions

LEAVE A REPLY Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Select a Device Manufacturer

Find us on Facebook

Android USB Drivers Facebook

More Lava USB Drivers

Lava Iris 503E USB Driver

Lava Iris 503E USB Driver

Lava Iris 504Q Plus USB Driver

Lava Iris 504Q Plus USB Driver

Lava Iris 504Q USB Driver

Lava Iris 504Q USB Driver

Lava Iris 506Q USB Driver

Lava Iris 506Q USB Driver

Lava Iris 505 USB Driver

Lava Iris 505 USB Driver

  • Privacy Policy
  • About
  • Contact Us
  • Sitemap

Copyright © 2023. Android USB Drivers | This site is not affiliated with Google or any of the device manufacturers listed on this site.