Having trouble connecting LG X Power to PC? It might be a driver problem, so download LG X Power Android USB Drivers and install them on Windows 11, Windows 10, Windows 7, 8, 8.1, or XP PC. The LG X Power USB Drivers provided here are official and are virus-free. Based on your need, download USB Driver for LG X Power from the downloads section and install it on Windows PC by following the instructions provided below.
With LG X Power USB Driver installed on the PC, we can establish a secure connection between Computer and Mobile. It helps transfer data like images, video, documents, and other files from Mobile to PC.
We have also provided LG X Power ADB and Fastboot drivers, which help pass ADB commands and Fastboot commands to the Phone via Command Prompt (CMD) from the computer.
Table of Contents
- 1 Download LG X Power USB Driver
- 2 How to Install LG X Power USB Drivers
- 3 How to Install LG X Power USB Drivers Manually
- 4 How to Install LG X Power ADB and Fastboot Drivers
Download LG X Power USB Driver
The LG mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.
LG X Power Driver for Flashing Firmware
LG X Power Driver for Mac OS
LG X Power USB Driver for normal connecting to PC
The LG X Power Fastboot and ADB drivers can be downloaded below.
LG X Power ADB and Fastboot Drivers
How to Install LG X Power USB Drivers
- Download the LG Phone Driver (LG-Mobile-Driver_WHQL_Ver_4.5.0.zip) file and extract it to Desktop on your computer.
- Once extracted, you'll find the LG United Mobile Driver setup (LG-Mobile-Driver_WHQL_Ver_4.5.0.exe) file.
- Right-click on the LG Mobile Driver setup file and select Run as administrator.
- Now, the LG USB Driver installation wizard window should launch on your computer.
- Click on Next to proceed with the LG Drivers installation.
- LG Mobile Drivers installation process should begin now.
- Once the LG Drivers are installed, a window should pop-up saying, "LG Mobile Driver Installed Successfully!".
- Click on OK.
- Restart your computer to complete the LG Mobile Phone Drivers installation.
- After reboot, you can connect your LG Mobile Phone to your computer over USB and use any LG software like LG Mobile Support Tool, LGUP Tool, etc.
How to Install LG X Power USB Drivers Manually
- Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
- Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window loads, click on your Computer name.
- Now click on Action and then select Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to launch the Install From Disk window.
- Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
How to Install LG X Power ADB and Fastboot Drivers
- Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
- Now, right-click on the ADB driver installer setup file and select Run as administrator.
- Now a command prompt window should load on your computer.
- It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should start.
- When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and reboot your computer.