Multilaser MS80 USB Driver helps in connecting the device to PC. On this page, Android USB Drivers provide official Multilaser MS80 drivers along with ADB Driver and Fastboot Driver.
Having trouble connecting Multilaser MS80 to PC? It might be a driver problem, so just download Multilaser USB Drivers and install them on Windows 10, 7, 8, 8.1 or XP PC. The Multilaser MS80 USB Drivers provided here are official and are virus free. Based on your need download USB Driver for Multilaser MS80 from the downloads section and install it on Windows PC by following the instructions provided below.
With Multilaser MS80 USB Driver installed on PC, we can establish a secure connection between Computer and Mobile. This helps in transferring data like images, video, documents and other files to and fro from Mobile to PC. We have also provided Multilaser MS80 ADB and Fastboot drivers which helps in passing commands to Phone via Command Prompt (CMD).
The Multilaser MS80 USB Driver provided below can be used for both flashing Stock Firmware and other stuff, and also for normally connecting Multilaser MS80 to Computer or Laptop.
Download Multilaser MS80 USB Driver
Multilaser MS80 Driver for Flashing Firmware
Multilaser MS80 USB Driver for normal connecting to PC
The Multilaser MS80 Fastboot and ADB drivers can be downloaded below.
Multilaser MS80 ADB and Fastboot Drivers
How to Install Multilaser MS80 USB Drivers Manually
Step 1: Download and extract the driver on your computer.
Step 2: Open Device Manager and Click on "Action".
Step 3: Now Click on "Add legacy hardware".
Note: If the "Add legacy hardware" option is missing then click on the empty space inside the Device Manager and then click on "Action". Now you should see "Add legacy hardware" option.
Step 4: Click Next.
Step 5: Select "Install the hardware that I manually select from a list (Advanced)".
Step 6: Select "Show All Devices" and Click on "Have Disk..."
Step 7: Click on Browse.
Step 8: Locate the extracted driver manually on your computer.
Step 9: Click Open and then OK.
Step 10: Choose the Driver you want to install and then Click on Next.
Step 11: Your Driver will be installed and listed in the Device Manager.
Step 12: If you see additional drivers in Step 10, then follow the instructions from Step 3 to Step 9 again and choose the driver listed below the one which you have previously installed. Similarly, follow for all the additional drivers.
How to Install Multilaser MS80 ADB and Fastboot Drivers
Step 1: Download the 15 Seconds ADB installer on your PC. If it is in the .zip archive then extract it to obtain the .exe file.
Step 2: Right-click on the file and Run as administrator.
Step 3: It should ask, whether you want to install ADB and Fastboot Driver on PC. Enter "Y" and hit Enter key.
Step 4: Now it should ask whether you want to install ADB system-wide. Enter "Y" and hit Enter.
Step 5: It should ask whether you want to install device drivers. Enter "Y" and hit Enter.
Step 6: Follow the on-screen instructions.
Step 7: Done.