Nokia 8.3 5G TA-1243 phone charging but not connecting to PC? Nokia 8.3 5G TA-1243 phone not showing up on PC? Maybe it is because of missing Nokia 8.3 5G TA-1243 USB drivers or bad or corrupt drivers. To fix the Nokia 8.3 5G TA-1243 phone won’t connect to a computer problem, download Nokia 8.3 5G TA-1243 USB Driver and install it on your computer.
Nokia USB Drivers are essential to connect Nokia 8.3 5G TA-1243 to a computer or laptop via USB cable. If you’re looking for Nokia 8.3 5G TA-1243 USB Driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then you can download them from the downloads section below. On this page, we have shared the official USB Driver for Nokia 8.3 5G TA-1243 along with ADB interface drivers and Fastboot drivers.
The Nokia 8.3 5G TA-1243 Android USB driver helps connect your phone as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files to and from phone to computer or laptop. If you’re facing an android file transfer not working issue, it is recommended to install Nokia 8.3 5G TA-1243 drivers to fix the problem.
On the other hand, the Nokia 8.3 5G TA-1243 ADB driver and Fastboot driver allows you to pass ADB commands and Fastboot commands to perform certain operations on your phone right from your computer.
Download Nokia 8.3 5G TA-1243 USB Driver
The Nokia mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. They can also be used for general purposes like transferring media, documents, and other data to and from mobile phone to computer.
Nokia 8.3 5G TA-1243 Driver for Flashing Firmware
How to install: Follow Tutorial
Nokia 8.3 5G TA-1243 USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Nokia 8.3 5G TA-1243 Fastboot and ADB drivers can be downloaded below.
Nokia 8.3 5G TA-1243 ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Nokia 8.3 5G TA-1251 USB Drivers
How to Install Nokia 8.3 5G TA-1243 USB Drivers Manually
- Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
- Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window loads, click on your Computer name.
- Now click on Action and then select Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to launch the Install From Disk window.
- Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
How to Install Nokia 8.3 5G TA-1243 ADB and Fastboot Drivers
- Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
- Now, right-click on the ADB driver installer setup file and select Run as administrator.
- Now a command prompt window should load on your computer.
- It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should start.
- When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and reboot your computer.
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY