Sharp Sense3 Lite phone not connecting to PC only charging? Computer having trouble detecting the Sharp Sense3 Lite Android phone? It may be caused by the missing Sharp Sense3 Lite USB Driver or corrupted drivers. To fix Sharp Sense3 Lite phone not showing up on PC, download Sharp Sense3 Lite USB Drivers and install them on your computer.
Sharp USB Drivers are essential to seamlessly connect Sharp Sense3 Lite to a Computer or Laptop over USB. Without the Sharp Sense3 Lite drivers, the connection will not work, and your computer will have a hard time detecting your phone. On this page, you can download official Sharp Sense3 Lite USB Drivers for Windows 10, Windows 7, Windows 8.1, and Windows 8, along with Sharp Sense3 Lite ADB interface drivers and Fastboot drivers.
The Sharp Sense3 Lite Android USB Drivers allows you to establish a secure and reliable connection between your phone and the computer over the USB connection. It will enable you to connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents between your phone and the computer.
The Sharp Sense3 Lite ADB Driver and Fastboot Driver allows you to pass ADB commands and Fastboot commands right from your computer and perform certain operations on your phone.
Table of Contents
- 1 Download Sharp Sense3 Lite USB Driver
- 2 How to Install Sharp Sense3 Lite Qualcomm USB Drivers
- 3 How to Install Sharp Sense3 Lite USB Drivers Manually
- 4 How to Install Sharp Sense3 Lite ADB and Fastboot Drivers
Download Sharp Sense3 Lite USB Driver
The Sharp Mobile Drivers provided here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlock Bootloader, etc. It also allows you to transfer media, documents, and other files to and from your phone to your computer.
The Sharp Sense3 Lite Fastboot and ADB drivers can be downloaded below.
How to Install Sharp Sense3 Lite Qualcomm USB Drivers
- First of all, download Qualcomm USB Driver (qualcomm-driver.zip) package on your computer and extract it to Desktop.
- Once the Qualcomm Driver package is extracted, you'll find Qualcomm_USB_Driver_V1.0.exe setup file.
- Right-click on the Qualcomm USB Driver setup file and click on Run as administrator.
- Now Qualcomm USB Drivers for Windows installation wizard window should launch. Select ETHERNET-DHCP is used to get the IPAddress option and click on Next.
- Click on Next again to proceed with the Qualcomm Drivers installation on your Windows computer.
- Select I accept the terms in the license agreement and click on Next.
- Click on Install to begin the Qualcomm HS-USB Driver installation process.
- When a Windows Security window pops-up asking "Would you like to install this device software?" Click on Install.
- Click on Finish, when the Qualcomm Driver installation process is completed.
- Finally, restart your computer.
How to Install Sharp Sense3 Lite USB Drivers Manually
- Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
- Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window loads, click on your Computer name.
- Now click on Action and then select Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to launch the Install From Disk window.
- Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
How to Install Sharp Sense3 Lite ADB and Fastboot Drivers
- Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
- Now, right-click on the ADB driver installer setup file and select Run as administrator.
- Now a command prompt window should load on your computer.
- It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should start.
- When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and reboot your computer.