• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Android USB Drivers

Database of GSM USB Drivers for all Android Devices

  • Samsung
  • Lenovo
  • Asus
  • OnePlus
  • Vivo
  • Xiaomi
  • Huawei
  • BLU
Home ›› SkyTiger ›› SkyTiger ST-1301

SkyTiger ST-1301 USB Drivers

FacebookTwitterReddit

SkyTiger ST-1301 phone not connecting to PC only charging? Or SkyTiger ST-1301 phone not showing up on the computer? It may be caused by the missing SkyTiger ST-1301 USB drivers or corrupted drivers. To fix the problem of the SkyTiger ST-1301 phone won’t connect to a computer, download the SkyTiger ST-1301 USB driver, and install it on your computer.

To properly connect SkyTiger ST-1301 to a Computer or Laptop using a USB cable, SkyTiger USB drivers must be installed on your Windows computer. If you’re wondering where you can download the SkyTiger ST-1301 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, or Windows 8, then we have got you covered. Here on this page, we have shared the official USB driver for SkyTiger ST-1301 and the ADB interface drivers, and Fastboot drivers.

Once the SkyTiger ST-1301 Android USB Driver is installed, you’ll be able to connect SkyTiger ST-1301 to a computer as an MTP USB device (MTP Transfer Protocol). When connected as an MTP device, you can transfer images, videos, documents, and other files to and from your phone to your computer.

If you have installed the SkyTiger ST-1301 ADB driver and Fastboot driver on your computer, then you can pass ADB commands and Fastboot commands to perform certain operations on your phone from your computer.

Table of Contents

  • 1 Download SkyTiger ST-1301 USB Driver
    • 1.1 SkyTiger ST-1301 Driver for Flashing Firmware
    • 1.2 SkyTiger ST-1301 USB Driver for normal connecting to PC
    • 1.3 SkyTiger ST-1301 ADB and Fastboot Drivers
  • 2 How to Install SkyTiger ST-1301 USB Drivers Manually
  • 3 How to Install SkyTiger ST-1301 ADB and Fastboot Drivers

Download SkyTiger ST-1301 USB Driver

The SkyTiger Mobile Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlocking bootloader, etc. It can also be used for general purposes like transferring media, documents, and other files from phone to computer and vice versa.

SkyTiger ST-1301 Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

SkyTiger ST-1301 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The SkyTiger ST-1301 Fastboot and ADB drivers can be downloaded below.

SkyTiger ST-1301 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: SkyTiger ST-703 USB Drivers

How to Install SkyTiger ST-1301 USB Drivers Manually

  1. Download and extract the latest_usb_driver_windows.zip package on your computer.Google Android USB Driver extracted - SkyTiger ST-1301 USB Drivers
  2. Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.Windows Start Button Device Manager - SkyTiger ST-1301 USB Drivers
  3. Once the Device Manager window opens, click on your Computer name.Device Manager Computer Name - SkyTiger ST-1301 USB Drivers
  4. Now click on Action and then on Add legacy hardware.Device Manager Add legacy hardware - SkyTiger ST-1301 USB Drivers
  5. Now Add Hardware Wizard window should pop-up. Click on Next to continue.Add Hardware Wizard - SkyTiger ST-1301 USB Drivers
  6. In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.Install Hardware Manually - SkyTiger ST-1301 USB Drivers
  7. Now select Show All Devices and click on Next.Show all Hardware Devices - SkyTiger ST-1301 USB Drivers
  8. Now click on Have Disk… to open the Install From Disk window.Add Hardware Have Disk - SkyTiger ST-1301 USB Drivers
  9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.Install From Disk Browse - SkyTiger ST-1301 USB Drivers
  10. Now select android_winusb.inf file and click on Open and then on OK.Google Android USB Driver inf - SkyTiger ST-1301 USB Drivers
  11. Select the Android ADB Interface driver from the list and click on Next.Install Android ADB Interface Driver - SkyTiger ST-1301 USB Drivers
  12. Confirm the Hardware driver to install and click on Next to begin the installation process.Android ADB Interface Driver Install - SkyTiger ST-1301 USB Drivers
  13. Once installed, click on Finish.Android ADB Interface Driver Installed - SkyTiger ST-1301 USB Drivers
  14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.Install Android Bootloader Interface Driver - SkyTiger ST-1301 USB Drivers
  15. Once all the listed drivers are installed, reboot your computer.

How to Install SkyTiger ST-1301 ADB and Fastboot Drivers

  1. Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.15 Seconds ADB Installer - SkyTiger ST-1301 USB Drivers
  2. Now right click on the adb driver installer setup file and click on Run as administrator.Open ADB and Fastboot Installer - SkyTiger ST-1301 USB Drivers
  3. Now you'll see a command prompt window with a blue background and white text.ADB and Fastboot installer - SkyTiger ST-1301 USB Drivers
  4. It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.Install ADB and Fastboot Driver - SkyTiger ST-1301 USB Drivers
  5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.Install ADB system wide - SkyTiger ST-1301 USB Drivers
  6. Now, the ADB and Fastboot installation process should begin.
  7. When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.ADB install device drivers - SkyTiger ST-1301 USB Drivers
  8. Now the "Device Driver Installation Wizard" window should open.
  9. Click on Next to continue installing the Google USB Drivers (WinUSB).Install Google Android USB Driver WinUSB - SkyTiger ST-1301 USB Drivers
  10. Once installed, click on Finish and restart your computer.Google USB Driver installation complete - SkyTiger ST-1301 USB Drivers

Important Notes:

[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.

[*] Broken link: Report here.

[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

SHARE ON
TwitterFacebookWhatsAppRedditBufferLinkedInPin It

Reader Interactions

LEAVE A REPLY Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Select a Device Manufacturer

Find us on Facebook

Android USB Drivers Facebook

More SkyTiger USB Drivers

SkyTiger ST-702 USB Driver

SkyTiger ST-702 USB Driver

SkyTiger ST-701 USB Driver

  • Privacy Policy
  • About
  • Contact Us
  • Sitemap

Copyright © 2022. Android USB Drivers | This site is not affiliated with Google or any of the device manufacturers listed on this site.