Facing trouble connecting Smartron t Phone to a computer using a USB cable? Computer not recognizing USB when Smartron t Phone is connected to PC? It might be because of the missing Smartron t Phone USB drivers or bad or corrupted drivers. To fix the Smartron t Phone not showing up on the computer, download Smartron t Phone USB Drivers and install them on your Windows computer.
Most computers don’t have proper Google Android USB Drivers installed, so it is required to download Smartron USB Drivers and install them on your computer. Once the Smartron drivers are installed, we can adequately connect Smartron t Phone to the Computer or Laptop using a USB data cable. You can download official USB Drivers for Smartron t Phone along with ADB interface drivers and fastboot drivers on this page.
With Smartron t Phone Android USB Drivers installed, we can establish a secure connection between a computer and a smartphone. It helps transfer files and data like images, videos, and documents between the computer and the mobile phone through MTP (Media Transfer Protocol).
With the Smartron t Phone ADB driver and Fastboot driver, we can pass ADB commands and Fastboot commands to the phone from the computer via Command Prompt (CMD) and perform certain operations.
Table of Contents
- 1 Download Smartron t Phone USB Driver
- 2 How to Install Smartron t Phone Qualcomm USB Drivers
- 3 How to Install Smartron t Phone USB Drivers Manually
- 4 How to Install Smartron t Phone ADB and Fastboot Drivers
Download Smartron t Phone USB Driver
The Smartron Mobile Phone drivers provided here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlocking Bootloader, etc. They can also be used for common purposes like transferring media, files, and documents to and from phone to computer.
Smartron t Phone Driver for Flashing Firmware
Smartron t Phone USB Driver for normal connecting to PC
The Smartron t Phone Fastboot and ADB drivers can be downloaded below.
Smartron t Phone ADB and Fastboot Drivers
How to Install Smartron t Phone Qualcomm USB Drivers
- Download and extract Qualcomm USB Driver (qualcomm-driver.zip) package to Desktop on your computer.
- After extracting, you'll find the Qualcomm Driver setup file (Qualcomm_USB_Driver_V1.0.exe).
- Right-click on the Qualcomm USB Drivers setup file and select Run as administrator.
- Now Qualcomm USB Drivers for Windows – InstallShield Wizard window should open. Select ETHERNET-DHCP is used to get the IPAddress option and click on Next.
- Click on Next again to proceed with the installation process.
- Select I accept the terms in the license agreement and click on Next.
- Now, click on Install to begin the Qualcomm HS-USB Driver installation.
- Click on Install if a Windows Security window asking, "Would you like to install this device software?" pop-up.
- Once the drivers are installed, click on Finish to close the installation wizard window.
- Finally, reboot your computer.
How to Install Smartron t Phone USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip package on your computer.
- Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window opens, click on your Computer name.
- Now click on Action and then on Add legacy hardware.
- Now Add Hardware Wizard window should pop-up. Click on Next to continue.
- In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
How to Install Smartron t Phone ADB and Fastboot Drivers
- Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.
- Now right click on the adb driver installer setup file and click on Run as administrator.
- Now you'll see a command prompt window with a blue background and white text.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
- Now, the ADB and Fastboot installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the "Device Driver Installation Wizard" window should open.
- Click on Next to continue installing the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.