Windows computer not recognizing SoftBank ZTE 003z Phone? Or SoftBank ZTE 003z android phone won’t connect to the PC? It can be the result of missing SoftBank ZTE 003z USB drivers or bad or corrupted drivers. To fix SoftBank ZTE 003z Android phone not showing up on PC, download the SoftBank ZTE 003z USB driver and install it on your computer.
SoftBank USB drivers are essential to efficiently connect SoftBank ZTE 003z to Computer and Laptop using a USB cable. On this page, we have managed to share the official SoftBank ZTE 003z USB driver for Windows 10, Windows 7, Windows 8.1, and Windows 8. Apart from the official USB Driver for SoftBank ZTE 003z, we have also shared SoftBank ZTE 003z ADB interface drivers and Fastboot drivers.
The SoftBank ZTE 003z Android USB driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to the computer so that you can transfer images, videos, documents, and other files between the phone and computer. Thus it will fix the android file transfer not working issue.
The SoftBank ZTE 003z ADB driver and Fastboot driver allow you to pass ADB and Fastboot commands from the PC to perform certain operations on your phone.
Table of Contents
Download SoftBank ZTE 003z USB Driver
The SoftBank mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes like transferring media and files to and from mobile to PC.
SoftBank ZTE 003z Driver for Flashing Firmware
How to install: Follow Tutorial
SoftBank ZTE 003z USB Driver for normal connecting to PC
How to install: Follow Tutorial
The SoftBank ZTE 003z Fastboot and ADB drivers can be downloaded below.
SoftBank ZTE 003z ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: SoftBank 740SC USB Drivers
How to Install SoftBank ZTE 003z Qualcomm USB Drivers
- Download and extract Qualcomm USB Driver (qualcomm-driver.zip) package to Desktop on your computer.
- After extracting, you'll find the Qualcomm Driver setup file (Qualcomm_USB_Driver_V1.0.exe).
- Right-click on the Qualcomm USB Drivers setup file and select Run as administrator.
- Now Qualcomm USB Drivers for Windows – InstallShield Wizard window should open. Select ETHERNET-DHCP is used to get the IPAddress option and click on Next.
- Click on Next again to proceed with the installation process.
- Select I accept the terms in the license agreement and click on Next.
- Now, click on Install to begin the Qualcomm HS-USB Driver installation.
- Click on Install if a Windows Security window asking, "Would you like to install this device software?" pop-up.
- Once the drivers are installed, click on Finish to close the installation wizard window.
- Finally, reboot your computer.
How to Install SoftBank ZTE 003z USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip package on your computer.
- Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window opens, click on your Computer name.
- Now click on Action and then on Add legacy hardware.
- Now Add Hardware Wizard window should pop-up. Click on Next to continue.
- In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
How to Install SoftBank ZTE 003z ADB and Fastboot Drivers
- Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.
- Now right click on the adb driver installer setup file and click on Run as administrator.
- Now you'll see a command prompt window with a blue background and white text.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
- Now, the ADB and Fastboot installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the "Device Driver Installation Wizard" window should open.
- Click on Next to continue installing the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY