Computer not recognizing USB when Vestel Venus 5.5 is connected to PC using a USB cable? Vestel Venus 5.5 phone not showing up on PC? It might be a driver problem, or your computer might be missing the required Vestel Venus 5.5 USB Drivers. To fix the issue, download Vestel Venus 5.5 USB Driver and install them on your computer.
Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download Vestel USB Drivers and install them on your computer to properly connect Vestel Venus 5.5 to a Computer or Laptop using a USB cable. Here on this page, we have shared the official Vestel Venus 5.5 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8.
Apart from the official USB Driver for Vestel Venus 5.5, we have also shared ADB interface drivers and Fastboot drivers for Vestel Venus 5.5.
The Vestel Venus 5.5 Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.
The Vestel Venus 5.5 ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.
Table of Contents
- 1 Download Vestel Venus 5.5 USB Driver
- 2 How to Install Vestel Venus 5.5 Qualcomm USB Drivers
- 3 How to Install Vestel Venus 5.5 USB Drivers Manually
- 4 How to Install Vestel Venus 5.5 ADB and Fastboot Drivers
Download Vestel Venus 5.5 USB Driver
The Vestel Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.
Vestel Venus 5.5 Driver for Flashing Firmware
Vestel Venus 5.5 USB Driver for normal connecting to PC
The Vestel Venus 5.5 Fastboot and ADB drivers can be downloaded below.
Vestel Venus 5.5 ADB and Fastboot Drivers
How to Install Vestel Venus 5.5 Qualcomm USB Drivers
- Download Qualcomm Driver (qualcomm-driver.zip) package and extract it to Desktop on your computer.
- Once the Qualcomm USB Driver package is extracted, you'll find Qualcomm_USB_Driver_V1.0.exe setup file.
- Now, right-click on the Qualcomm USB Driver setup file and select Run as administrator.
- Now Qualcomm USB Drivers for Windows installation wizard window should open. Select ETHERNET-DHCP is used to get the IPAddress option and click on Next.
- Again click on Next to proceed with the Qualcomm Drivers installation wizard.
- In the next screen, select I accept the terms in the license agreement and click on Next.
- Click on Install to begin the Qualcomm HS-USB Driver installation.
- When a Windows Security window pops-up asking "Would you like to install this device software?" Click on Install.
- Once the driver installation process is completed, click on Finish.
- Finally, reboot your computer.
How to Install Vestel Venus 5.5 USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
- Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
- When the Device Manager window opens, click on your Computer name.
- Now click on Action and then click on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now click on Show All Devices from the list and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Now select the Android ADB Interface driver from the list and click on Next.
- In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
How to Install Vestel Venus 5.5 ADB and Fastboot Drivers
- Download and extract the 15 seconds ADB installer zip package on your computer.
- Now right click on the adb installer setup exe file and click on Run as administrator.
- Now a command prompt window should open.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
- Now, the ADB driver and Fastboot driver installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the "Device Driver Installation Wizard" window should open.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.