Windows computer not recognizing Vivo T1 Phone? Or Vivo T1 android phone won’t connect to the PC? It can be the result of missing Vivo T1 USB drivers or bad or corrupted drivers. To fix Vivo T1 Android phone not showing up on PC, download the Vivo T1 USB driver and install it on your computer.
Vivo USB drivers are essential to efficiently connect Vivo T1 to Computer and Laptop using a USB cable. On this page, we have managed to share the official Vivo T1 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Apart from the official USB Driver for Vivo T1, we have also shared Vivo T1 ADB interface drivers and Fastboot drivers.
The Vivo T1 Android USB driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to the computer so that you can transfer images, videos, documents, and other files between the phone and computer. Thus it will fix the android file transfer not working issue.
The Vivo T1 ADB driver and Fastboot driver allow you to pass ADB and Fastboot commands from the PC to perform certain operations on your phone.
Table of Contents
Download Vivo T1 USB Driver
The Vivo mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes like transferring media and files to and from mobile to PC.
Vivo T1 Driver for Flashing Firmware
How to install: Follow Tutorial
Vivo T1 USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Vivo T1 Fastboot and ADB drivers can be downloaded below.
Vivo T1 ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Vivo T1x USB Drivers
How to Install Vivo T1 Qualcomm USB Drivers
- First of all, download Qualcomm USB Driver (qualcomm-driver.zip) package on your computer and extract it to Desktop.
- Once the Qualcomm Driver package is extracted, you'll find Qualcomm_USB_Driver_V1.0.exe setup file.
- Right-click on the Qualcomm USB Driver setup file and click on Run as administrator.
- Now Qualcomm USB Drivers for Windows installation wizard window should launch. Select ETHERNET-DHCP is used to get the IPAddress option and click on Next.
- Click on Next again to proceed with the Qualcomm Drivers installation on your Windows computer.
- Select I accept the terms in the license agreement and click on Next.
- Click on Install to begin the Qualcomm HS-USB Driver installation process.
- When a Windows Security window pops-up asking "Would you like to install this device software?" Click on Install.
- Click on Finish, when the Qualcomm Driver installation process is completed.
- Finally, restart your computer.
How to Install Vivo T1 USB Drivers Manually
- Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
- Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window loads, click on your Computer name.
- Now click on Action and then select Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to launch the Install From Disk window.
- Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
How to Install Vivo T1 ADB and Fastboot Drivers
- Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
- Now, right-click on the ADB driver installer setup file and select Run as administrator.
- Now a command prompt window should load on your computer.
- It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should start.
- When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and reboot your computer.
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY