VSun i1s USB Drivers

Having trouble connecting VSun i1s to PC? It might be a driver problem, so download VSun i1s Android USB Drivers and install them on Windows 10, 7, 8, 8.1, or XP PC. The VSun i1s USB Drivers provided here are official and are virus-free. Based on your need, download USB Driver for VSun i1s from the downloads section and install it on Windows PC by following the instructions provided below.

With VSun i1s USB Driver installed on the PC, we can establish a secure connection between Computer and Mobile. It helps transfer data like images, video, documents, and other files from Mobile to PC.

We have also provided VSun i1s ADB and Fastboot drivers, which help pass ADB commands and Fastboot commands to the Phone via Command Prompt (CMD) from the computer.

Download VSun i1s USB Driver

The Vsun mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.

VSun i1s Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

VSun i1s USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The VSun i1s Fastboot and ADB drivers can be downloaded below.

VSun i1s ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Vsun Cube Plus USB Drivers

How to Install VSun i1s USB Drivers Manually

1. Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
2. Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Once the Device Manager window loads, click on your Computer name.
4. Now click on Action and then select Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now select Show All Devices and click on Next.
8. Now click on Have Disk… to launch the Install From Disk window.
9. Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf driver file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

How to Install VSun i1s ADB and Fastboot Drivers

1. Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
2. Now, right-click on the ADB driver installer setup file and select Run as administrator.
3. Now a command prompt window should load on your computer.
4. It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
5. Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
6. Now, the ADB and Fastboot driver installation process should start.
7. When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
8. Now the "Device Driver Installation Wizard" window should pop-up.
9. Click on Next to install the Google USB Drivers (WinUSB).
10. Once the installation process is completed, click on Finish and reboot your computer.