Karbonn A12 Plus USB Drivers

Karbonn A12 Plus phone not connecting to PC only charging? Or Karbonn A12 Plus phone not showing up on the computer? It may be caused by the missing Karbonn A12 Plus USB drivers or corrupted drivers. To fix the problem of the Karbonn A12 Plus phone won’t connect to a computer, download the Karbonn A12 Plus USB driver, and install it on your computer.

To properly connect Karbonn A12 Plus to a Computer or Laptop using a USB cable, Karbonn USB drivers must be installed on your Windows computer. If you’re wondering where you can download the Karbonn A12 Plus USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, or Windows 8, then we have got you covered. Here on this page, we have shared the official USB driver for Karbonn A12 Plus and the ADB interface drivers, and Fastboot drivers.

Once the Karbonn A12 Plus Android USB Driver is installed, you’ll be able to connect Karbonn A12 Plus to a computer as an MTP USB device (MTP Transfer Protocol). When connected as an MTP device, you can transfer images, videos, documents, and other files to and from your phone to your computer.

If you have installed the Karbonn A12 Plus ADB driver and Fastboot driver on your computer, then you can pass ADB commands and Fastboot commands to perform certain operations on your phone from your computer.

Download Karbonn A12 Plus USB Driver

The Karbonn Mobile Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlocking bootloader, etc. It can also be used for general purposes like transferring media, documents, and other files from phone to computer and vice versa.

Karbonn A12 Plus CDC Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Karbonn A12 Plus VCOM Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Karbonn A12 Plus USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Karbonn A12 Plus Fastboot and ADB drivers can be downloaded below.

Karbonn A12 Plus ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Karbonn A14 USB Drivers

How to Install Karbonn A12 Plus CDC Drivers

1. Download and extract the android-cdc-driver.zip file on your computer.
2. Open Device Manager on your computer by right-clicking the Windows Start Button and selecting Device Manager.
3. Once the Device Manager loads, click on your Computer name.
4. Now click on Action and then on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. In the next screen, select Show All Devices from the list and click on Next.
8. Now click on Have Disk… to launch Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the Android CDC drivers in Step #1.
10. Now select Android_Gadget_CDC_driver.inf file and click on Open and then on OK.
11. Select Android Gadget VCOM Driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
15. Once all the listed drivers are installed, reboot your computer.

How to Install Karbonn A12 Plus VCOM Drivers

1. Download and extract the latest Android VCOM Driver (android-vcom-driver.zip) file to Desktop on your computer.
2. Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then click on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. In the next screen, click on Have Disk… to open the Install From Disk window.
9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. When selected, click on Open and then on OK.
11. Now select the MediaTek DA USB VCOM Port from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
15. Once all the listed drivers are installed, restart your computer.

How to Install Karbonn A12 Plus USB Drivers Manually

1. Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
2. Open the Device Manager on your computer by searching device manager from Windows Start Menu.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then select Add legacy hardware.
5. Add Hardware Wizard window should open, click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. On the next screen, click on Have Disk… to open the Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

How to Install Karbonn A12 Plus ADB and Fastboot Drivers

1. Download and extract 15 seconds ADB installer on your computer.
2. Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
3. Now a command prompt window with a blue background and white text should open.
4. It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
6. Now, the ADB driver and Fastboot driver installation process should begin.
7. When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
8. Now the "Device Driver Installation Wizard" window should open.
9. Click on Next to continue installing the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and reboot your computer.