Lenovo Vibe X3 phone not showing up on the PC? Or Lenovo Vibe X3 phone won’t connect to a computer? It might be because of the missing Lenovo Vibe X3 USB drivers or corrupted drivers. To fix the problem, download the Lenovo Vibe X3 USB driver and install it on your computer.
Lenovo USB drivers are required to connect Lenovo Vibe X3 to a Computer or Laptop via USB cable. If you’re looking for a Lenovo Vibe X3 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then we have got you covered. We have shared the official USB Driver for Lenovo Vibe X3 along with the ADB interface drivers and Fastboot drivers on this page.
With Lenovo Vibe X3 Android USB Driver installed, we can connect the device to the computer as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files between the two devices.
Lenovo Vibe X3 ADB Driver and Fastboot Driver enable you to pass ADB commands and Fastboot commands from the computer to perform certain operations on your phone.
Table of Contents
- 1 Download Lenovo Vibe X3 USB Driver
- 2 How to Install Lenovo Vibe X3 USB Drivers
- 3 How to Install Lenovo Vibe X3 USB Drivers Manually
- 4 How to Install Lenovo Vibe X3 ADB and Fastboot Drivers
Download Lenovo Vibe X3 USB Driver
The Lenovo mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.
Lenovo Vibe X3 Driver for Flashing Firmware
Lenovo Vibe X3 USB Driver for normal connecting to PC
The Lenovo Vibe X3 Fastboot and ADB drivers can be downloaded below.
Lenovo Vibe X3 ADB and Fastboot Drivers
How to Install Lenovo Vibe X3 USB Drivers
- Download the Lenovo Phone Drivers (LePhone2.0.zip) package and extract it to Desktop on your computer.
- Once the package is extracted, you'll get the Lenovo Drivers setup (LePhone2.0.msi) file.
- Now, run the Lenovo USB Drivers setup file on your computer.
- Lenovo LePhone Driver Setup window should open. Click on the Next button to continue.
- In the next step, choose the destination folder where you would like to install Lenovo Mobile Drivers and click on Next to continue.
- Now, click on Install to begin the Lenovo USB Driver installation.
- Wait for the installation process to install the Lenovo Drivers.
- When the drivers are installed successfully, click on the Finish button to close the setup window.
- Now, restart your computer.
- After restart, you can connect your Lenovo Mobile Phone or Tablet to your computer over USB using USB data cable and use any Lenovo software like Lenovo Downloader Tool, etc.
How to Install Lenovo Vibe X3 USB Drivers Manually
- Download and extract the latest Android USB Driver (latest_usb_driver_windows.zip) file to Desktop on your computer.
- Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Now click on your Computer name in the Device Manager window.
- Now click on Action and then click on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Select Show All Devices from the list and click on Next.
- In the next screen, click on Have Disk… to open the Install From Disk window.
- In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Now select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
How to Install Lenovo Vibe X3 ADB and Fastboot Drivers
- Download and extract the 15 Seconds ADB installer zip file on your computer. Once extracted, you'll find the ADB driver installer setup file.
- Right-click on the ADB installer setup file and select Run as administrator.
- Now 15 seconds ADB driver installer command prompt window should open on your computer.
- It should ask whether you want to install the ADB driver and Fastboot driver. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should begin.
- When the ADB driver installation is finished, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to begin installing Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and restart your computer.