Motorola Fire XT (XT530) USB Drivers

Having trouble connecting Motorola Fire XT (XT530) to PC? It might be a driver problem, so download Motorola Fire XT (XT530) Android USB Drivers and install them on Windows 11, Windows 10, Windows 7, 8, 8.1, or XP PC. The Motorola Fire XT (XT530) USB Drivers provided here are official and are virus-free. Based on your need, download USB Driver for Motorola Fire XT (XT530) from the downloads section and install it on Windows PC by following the instructions provided below.

With Motorola Fire XT (XT530) USB Driver installed on the PC, we can establish a secure connection between Computer and Mobile. It helps transfer data like images, video, documents, and other files from Mobile to PC.

We have also provided Motorola Fire XT (XT530) ADB and Fastboot drivers, which help pass ADB commands and Fastboot commands to the Phone via Command Prompt (CMD) from the computer.

Download Motorola Fire XT (XT530) USB Driver

The Motorola mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.

Motorola Fire XT (XT530) Driver for Flashing Firmware

Download Now (32-bit)

How to install: Follow Tutorial

Download Now (64-bit)

How to install: Follow Tutorial

Download Motorola Device Manager Latest Version

Download Now

Motorola Fire XT (XT530) USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Motorola Fire XT (XT530) Fastboot and ADB drivers can be downloaded below.

Motorola Fire XT (XT530) ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Motorola Moto Z2 USB Drivers

How to Install Motorola Fire XT (XT530) USB Drivers

1. Download and extract the Motorola Drivers package on your computer.
2. After extracting the driver package, you'll get the Motorola USB Drivers setup file.
3. Run the Motorola USB Driver setup file on your computer.
4. Motorola Mobile Drivers Installation window should open.
5. Click on Next to continue.
6. Now agree with the License Agreement by selecting "I Agree" and click on Next.
7. Moto USB Drivers installation process should begin.
8. Once the Motorola Phone Drivers installation is completed, click on Close to exit the setup.
9. Now reboot your computer.
10. Now you are ready to connect your Motorola Mobile Phone or Tablet to the computer through USB and use any Motorola software like Motorola Device Manager, RSD Lite Tool, etc.

How to Install Motorola Fire XT (XT530) USB Drivers Manually

1. Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
2. Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
3. When the Device Manager window opens, click on your Computer name.
4. Now click on Action and then click on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now click on Show All Devices from the list and click on Next.
8. Now click on Have Disk… to open the Install From Disk window.
9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf driver file and click on Open and then on OK.
11. Now select the Android ADB Interface driver from the list and click on Next.
12. In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, reboot your computer.

How to Install Motorola Fire XT (XT530) ADB and Fastboot Drivers

1. Download and extract the 15 seconds ADB installer zip package on your computer.
2. Now right click on the adb installer setup exe file and click on Run as administrator.
3. Now a command prompt window should open.
4. It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
6. Now, the ADB driver and Fastboot driver installation process should begin.
7. When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
8. Now the "Device Driver Installation Wizard" window should open.
9. Click on Next to install the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and restart your computer.