Computer not recognizing USB when Samsung Galaxy Jump 3 is connected to PC using a USB cable? Samsung Galaxy Jump 3 phone not showing up on PC? It might be a driver problem, or your computer might be missing the required Samsung Galaxy Jump 3 USB Drivers. To fix the issue, download Samsung Galaxy Jump 3 USB Driver and install them on your computer.
Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download Samsung USB Drivers and install them on your computer to properly connect Samsung Galaxy Jump 3 to a Computer or Laptop using a USB cable. Here on this page, we have shared the official Samsung Galaxy Jump 3 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8.
Apart from the official USB Driver for Samsung Galaxy Jump 3, we have also shared ADB interface drivers and Fastboot drivers for Samsung Galaxy Jump 3.
The Samsung Galaxy Jump 3 Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.
The Samsung Galaxy Jump 3 ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.
Download Samsung Galaxy Jump 3 USB Driver
The Samsung Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.
Samsung Galaxy Jump 3 Driver for Flashing Firmware
How to install: Follow Tutorial
Samsung Galaxy Jump 3 USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Samsung Galaxy Jump 3 Fastboot and ADB drivers can be downloaded below.
Samsung Galaxy Jump 3 ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Samsung Galaxy A55 5G USB Drivers
How to Install Samsung Galaxy Jump 3 USB Drivers
- Download and extract Samsung Phone Drivers (SAMSUNG_USB_Driver_for_Mobile_Phones.zip) to Desktop on your computer.
- Once extracted, you'll find SAMSUNG_USB_Driver_for_Mobile_Phones.exe setup file.
- Now, right-click on the Samsung USB Drivers setup file and click on Run as administrator.
- Now the Samsung USB Driver for Mobile Phones Install Wizard window should open.
- Click on Next to continue with the Samsung Mobile Phone Drivers installation wizard.
- In the next step, select your Language as US English and Country or region as the United States of America (USA). You can also choose your desired Country or region if you want to from the list.
- Now, choose the Installation Location where you want to install Samsung Mobile Drivers. It is recommended to install Samsung Drivers to the default location (C:\Program Files\SAMSUNG\USB Drivers).
- Click on Install to begin the Samsung Phone Drivers installation process.
- When the Samsung USB Driver installation is completed, click on Finish.
- Finally, restart your computer.
How to Install Samsung Galaxy Jump 3 USB Drivers Manually
- Download and extract the latest Google Android USB Driver (latest_usb_driver_windows.zip) on your computer.
- Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window loads, click on your Computer name.
- Now click on Action and then select Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to launch the Install From Disk window.
- Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
Video Tutorial: How to Install Samsung Galaxy Jump 3 Android USB Drivers
How to Install Samsung Galaxy Jump 3 ADB and Fastboot Drivers
- Download the 15 Seconds ADB installer on your computer. Once downloaded, extract the zip file to obtain the ADB installer setup file.
- Now, right-click on the ADB driver installer setup file and select Run as administrator.
- Now a command prompt window should load on your computer.
- It should ask whether you want to install ADB and Fastboot driver on your computer. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should start.
- When the installation is completed, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and reboot your computer.
Video Tutorial: How to Install Samsung Galaxy Jump 3 ADB and Fastboot Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY